进一步迭代优化统一管理

.trae/documents/STM32F407项目优化迭代计划.md

@@ -0,0 +1,163 @@
+# STM32F407项目优化计划
+
+## 1. 项目现状分析
+
+通过对代码的深入分析，当前项目已经具备了基本的HAL（硬件抽象层）和BSP（板级支持包）分层设计，但在以下方面还有很大的优化空间：
+
+### 1.1 HAL层现状
+- 已实现GPIO、UART、SPI等基本外设的HAL驱动
+- 采用了架构分离的设计（通过HAL_TARGET_ARCH宏）
+- 缺少统一的错误处理机制
+- 缺少统一的HAL模块管理机制
+
+### 1.2 BSP层现状
+- 实现了基本的板级初始化
+- 采用了配置结构体的方式定义板级配置
+- 缺少基于配置文件的初始化机制
+- 模块化程度不够，外设驱动之间耦合度较高
+
+## 2. 优化目标
+
+### 2.1 HAL层优化目标
+- 完善架构抽象，提高通用性
+- 实现统一的错误处理机制
+- 增加HAL模块管理机制
+- 支持更多外设类型
+
+### 2.2 BSP层优化目标
+- 实现基于配置文件的BSP初始化
+- 增加BSP层的模块化设计
+- 优化板级配置结构体
+- 支持动态扩展的外设配置
+
+## 3. 具体实施步骤
+
+### 3.1 HAL层优化
+
+**3.1.1 完善HAL层架构抽象**
+
+1. **修改`hal.h`**
+   - 增加HAL模块管理机制
+   - 定义统一的错误码枚举
+   - 增加HAL层版本信息
+   - 完善架构分离机制
+
+2. **实现统一的HAL模块初始化**
+   - 创建`hal_module.h`，定义HAL模块管理接口
+   - 实现HAL模块的注册、初始化和卸载功能
+   - 支持模块的依赖管理
+
+**3.1.2 优化HAL层错误处理**
+
+1. **定义统一的错误码**
+   ```c
+   typedef enum {
+       HAL_OK = 0,
+       HAL_ERROR,
+       HAL_BUSY,
+       HAL_TIMEOUT,
+       HAL_INVALID_PARAM,
+       HAL_NOT_SUPPORTED,
+       // 更多错误码...
+   } hal_status_t;
+   ```
+
+2. **修改HAL函数签名**
+   - 将所有HAL函数改为返回`hal_status_t`
+   - 增加错误信息传递机制
+   - 实现错误日志记录功能
+
+3. **实现错误处理工具函数**
+   - 编写`hal_error.h`，提供错误码转换和处理工具
+   - 支持错误信息的格式化输出
+
+### 3.2 BSP层优化
+
+**3.2.1 实现基于配置文件的BSP初始化**
+
+1. **设计配置文件格式**
+   - 采用JSON或二进制格式存储配置
+   - 支持分层配置结构
+   - 实现配置版本管理
+
+2. **实现配置文件解析器**
+   - 创建`bsp_config_parser.c`，实现配置文件解析功能
+   - 支持从Flash或文件系统加载配置
+   - 实现配置的验证和默认值填充
+
+3. **修改BSP初始化流程**
+   - 修改`bsp_init.c`，支持从配置文件加载配置
+   - 实现配置的动态应用
+   - 增加配置变更通知机制
+
+**3.2.2 增加BSP层模块化设计**
+
+1. **实现外设驱动模块化**
+   - 为每个外设驱动创建独立的模块
+   - 实现模块的注册和初始化机制
+   - 支持模块的动态加载和卸载
+
+2. **创建BSP模块管理机制**
+   - 编写`bsp_module.h`，定义BSP模块管理接口
+   - 实现模块的依赖管理
+   - 支持模块的优先级管理
+
+3. **优化外设驱动之间的交互**
+   - 采用事件驱动机制，减少外设驱动之间的耦合
+   - 实现外设驱动的异步操作支持
+   - 增加外设驱动的状态管理
+
+**3.2.3 优化板级配置结构体**
+
+1. **修改`bsp_board.h`**
+   - 增加配置结构体的版本字段
+   - 支持配置的动态扩展
+   - 实现配置的默认值机制
+
+2. **设计灵活的配置扩展机制**
+   - 采用链表或数组方式存储扩展配置
+   - 支持配置项的动态添加和删除
+   - 实现配置的序列化和反序列化
+
+3. **实现配置的校验机制**
+   - 增加配置项的合法性校验
+   - 支持配置的完整性检查
+   - 实现配置的自动修复功能
+
+## 4. 预期成果
+
+通过本次优化，项目将实现：
+
+- **更完善的HAL层**：具有统一的错误处理机制和模块管理，提高了通用性和可维护性
+- **更灵活的BSP层**：支持基于配置文件的初始化，模块化程度更高，外设驱动之间耦合度更低
+- **更优化的板级配置**：支持动态扩展和版本管理，配置更加灵活和可靠
+- **更好的可扩展性**：便于添加新的外设驱动和支持新的硬件平台
+- **更好的可维护性**：代码结构更清晰，错误处理更完善，便于调试和维护
+
+## 5. 实施顺序
+
+1. 首先优化HAL层的错误处理机制
+2. 然后完善HAL层的架构抽象
+3. 接着优化板级配置结构体
+4. 然后实现BSP层的模块化设计
+5. 最后实现基于配置文件的BSP初始化
+
+## 6. 风险评估
+
+- **风险1**：修改HAL函数签名可能导致现有代码无法编译
+  - **应对措施**：采用渐进式修改，先添加错误码返回，保持向后兼容
+
+- **风险2**：配置文件解析可能增加系统开销
+  - **应对措施**：优化解析算法，采用高效的解析库，支持配置的缓存机制
+
+- **风险3**：模块化设计可能增加代码复杂度
+  - **应对措施**：保持模块接口的简洁性，提供详细的文档和示例代码
+
+## 7. 测试计划
+
+- 单元测试：测试每个HAL函数的错误处理功能
+- 集成测试：测试HAL模块管理机制
+- 系统测试：测试基于配置文件的BSP初始化
+- 回归测试：确保现有功能不受影响
+
+通过以上优化，项目将在架构设计、代码质量和可维护性方面得到显著提升，为后续的功能扩展和平台移植奠定坚实的基础。

BSP/Inc/bsp_board.h

@@ -11,39 +11,53 @@
 #define BSP_BOARD_H
 
 #include <stdint.h>
+#include "hal.h"
 #include "hal_gpio.h"
 #include "hal_uart.h"
 #include "hal_spi.h"
+#include "hal_i2c.h"
+#include "hal_can.h"
+#include "hal_adc.h"
+
+/**
+ * @brief BSP configuration version
+ */
+#define BSP_CONFIG_VERSION_MAJOR 1
+#define BSP_CONFIG_VERSION_MINOR 0
+#define BSP_CONFIG_VERSION_PATCH 0
+#define BSP_CONFIG_VERSION (BSP_CONFIG_VERSION_MAJOR << 16 | BSP_CONFIG_VERSION_MINOR << 8 | BSP_CONFIG_VERSION_PATCH)
 
 /**
  * @brief Board LED configuration structure
  */
 typedef struct {
-    hal_gpio_port_t port;
-    hal_gpio_pin_t pin;
-    hal_gpio_mode_t mode;
-    hal_gpio_speed_t speed;
-    hal_gpio_pull_t pull;
+    uint8_t enable;                 /*!< LED enable flag */
+    hal_gpio_port_t port;           /*!< LED GPIO port */
+    hal_gpio_pin_t pin;             /*!< LED GPIO pin */
+    hal_gpio_mode_t mode;           /*!< LED GPIO mode */
+    hal_gpio_speed_t speed;         /*!< LED GPIO speed */
+    hal_gpio_pull_t pull;           /*!< LED GPIO pull configuration */
 } bsp_led_config_t;
 
 /**
  * @brief Board button configuration structure
  */
 typedef struct {
-    hal_gpio_port_t port;
-    hal_gpio_pin_t pin;
-    hal_gpio_mode_t mode;
-    hal_gpio_speed_t speed;
-    hal_gpio_pull_t pull;
-    uint8_t active_high;
+    hal_gpio_port_t port;           /*!< Button GPIO port */
+    hal_gpio_pin_t pin;             /*!< Button GPIO pin */
+    hal_gpio_mode_t mode;           /*!< Button GPIO mode */
+    hal_gpio_speed_t speed;         /*!< Button GPIO speed */
+    hal_gpio_pull_t pull;           /*!< Button GPIO pull configuration */
+    uint8_t active_high;            /*!< Button active high flag */
 } bsp_button_config_t;
 
 /**
  * @brief Board buttons configuration structure
  */
 typedef struct {
-    uint8_t count;
-    const bsp_button_config_t* buttons;
+    uint8_t enable;                 /*!< Buttons enable flag */
+    uint8_t count;                  /*!< Number of buttons */
+    const bsp_button_config_t* buttons; /*!< Pointer to buttons configuration array */
 } bsp_buttons_config_t;
 
 /**
@@ -63,62 +77,226 @@ typedef enum {
  * @brief Board UART configuration structure
  */
 typedef struct {
-    bsp_uart_instance_t instance;
-    uint32_t baudrate;
-    hal_uart_parity_t parity;
-    hal_uart_stopbits_t stopbits;
-    hal_uart_databits_t databits;
-    hal_gpio_port_t tx_port;
-    hal_gpio_pin_t tx_pin;
-    hal_gpio_port_t rx_port;
-    hal_gpio_pin_t rx_pin;
+    uint8_t enable;                 /*!< UART enable flag */
+    bsp_uart_instance_t instance;   /*!< UART instance */
+    uint32_t baudrate;              /*!< UART baudrate */
+    hal_uart_parity_t parity;       /*!< UART parity */
+    hal_uart_stopbits_t stopbits;   /*!< UART stop bits */
+    hal_uart_databits_t databits;   /*!< UART data bits */
+    hal_gpio_port_t tx_port;        /*!< UART TX port */
+    hal_gpio_pin_t tx_pin;          /*!< UART TX pin */
+    hal_gpio_port_t rx_port;        /*!< UART RX port */
+    hal_gpio_pin_t rx_pin;          /*!< UART RX pin */
 } bsp_uart_config_t;
 
 /**
  * @brief Board SPI configuration structure
  */
 typedef struct {
-    hal_spi_instance_t instance;
-    hal_spi_mode_t mode;
-    uint32_t baudrate;
-    hal_spi_polarity_t polarity;
-    hal_spi_phase_t phase;
-    hal_spi_databits_t databits;
+    uint8_t enable;                 /*!< SPI enable flag */
+    hal_spi_instance_t instance;    /*!< SPI instance */
+    hal_spi_mode_t mode;            /*!< SPI mode */
+    uint32_t baudrate;              /*!< SPI baudrate */
+    hal_spi_polarity_t polarity;    /*!< SPI clock polarity */
+    hal_spi_phase_t phase;          /*!< SPI clock phase */
+    hal_spi_databits_t databits;    /*!< SPI data bits */
+    hal_gpio_port_t sck_port;       /*!< SPI SCK port */
+    hal_gpio_pin_t sck_pin;         /*!< SPI SCK pin */
+    hal_gpio_port_t miso_port;      /*!< SPI MISO port */
+    hal_gpio_pin_t miso_pin;        /*!< SPI MISO pin */
+    hal_gpio_port_t mosi_port;      /*!< SPI MOSI port */
+    hal_gpio_pin_t mosi_pin;        /*!< SPI MOSI pin */
 } bsp_spi_config_t;
 
+/**
+ * @brief Board I2C configuration structure
+ */
+typedef struct {
+    uint8_t enable;                 /*!< I2C enable flag */
+    hal_i2c_instance_t instance;    /*!< I2C instance */
+    hal_i2c_speed_t speed;          /*!< I2C speed */
+    hal_i2c_address_mode_t address_mode; /*!< I2C address mode */
+    hal_i2c_dutycycle_t dutycycle;  /*!< I2C duty cycle */
+    uint16_t own_address1;          /*!< I2C own address 1 */
+    hal_gpio_port_t scl_port;       /*!< I2C SCL port */
+    hal_gpio_pin_t scl_pin;         /*!< I2C SCL pin */
+    hal_gpio_port_t sda_port;       /*!< I2C SDA port */
+    hal_gpio_pin_t sda_pin;         /*!< I2C SDA pin */
+} bsp_i2c_config_t;
+
+/**
+ * @brief Board CAN configuration structure
+ */
+typedef struct {
+    uint8_t enable;                 /*!< CAN enable flag */
+    hal_can_instance_t instance;    /*!< CAN instance */
+    hal_can_mode_t mode;            /*!< CAN mode */
+    uint32_t prescaler;             /*!< CAN prescaler */
+    uint8_t sync_jump_width;        /*!< CAN sync jump width */
+    uint8_t time_segment1;          /*!< CAN time segment 1 */
+    uint8_t time_segment2;          /*!< CAN time segment 2 */
+    hal_gpio_port_t rx_port;        /*!< CAN RX port */
+    hal_gpio_pin_t rx_pin;          /*!< CAN RX pin */
+    hal_gpio_port_t tx_port;        /*!< CAN TX port */
+    hal_gpio_pin_t tx_pin;          /*!< CAN TX pin */
+} bsp_can_config_t;
+
+/**
+ * @brief Board ADC channel configuration structure
+ */
+typedef struct {
+    uint8_t enable;                 /*!< ADC channel enable flag */
+    hal_adc_channel_t channel;      /*!< ADC channel */
+    hal_adc_sampletime_t sampletime; /*!< ADC sample time */
+    uint8_t rank;                   /*!< ADC channel rank */
+} bsp_adc_channel_config_t;
+
+/**
+ * @brief Board ADC configuration structure
+ */
+typedef struct {
+    uint8_t enable;                 /*!< ADC enable flag */
+    hal_adc_instance_t instance;    /*!< ADC instance */
+    hal_adc_resolution_t resolution; /*!< ADC resolution */
+    uint8_t scan_conversion_mode;   /*!< ADC scan conversion mode */
+    uint8_t continuous_conversion_mode; /*!< ADC continuous conversion mode */
+    uint8_t channel_count;          /*!< Number of ADC channels */
+    const bsp_adc_channel_config_t* channels; /*!< Pointer to ADC channels configuration array */
+} bsp_adc_config_t;
+
 /**
  * @brief Board W25QXX configuration structure
  */
 typedef struct {
-    hal_gpio_port_t cs_port;
-    hal_gpio_pin_t cs_pin;
-    bsp_spi_config_t spi_config;
+    uint8_t enable;                 /*!< W25QXX enable flag */
+    hal_gpio_port_t cs_port;        /*!< W25QXX CS port */
+    hal_gpio_pin_t cs_pin;          /*!< W25QXX CS pin */
+    uint8_t spi_instance;           /*!< SPI instance used by W25QXX */
 } bsp_w25qxx_config_t;
 
 /**
  * @brief Board peripheral initialization function type
  */
-typedef void (*bsp_periph_init_func_t)(const void* config);
+typedef hal_ret_t (*bsp_periph_init_func_t)(const void* config);
+
+/**
+ * @brief Board ID structure
+ */
+typedef struct {
+    uint16_t vendor_id;             /*!< Board vendor ID */
+    uint16_t product_id;            /*!< Board product ID */
+    uint32_t serial_number;         /*!< Board serial number */
+} bsp_board_id_t;
+
+/**
+ * @brief Board feature flags
+ */
+typedef enum {
+    BSP_BOARD_FEATURE_LED         = (1 << 0),  /*!< Board has LED support */
+    BSP_BOARD_FEATURE_BUTTON      = (1 << 1),  /*!< Board has button support */
+    BSP_BOARD_FEATURE_UART        = (1 << 2),  /*!< Board has UART support */
+    BSP_BOARD_FEATURE_SPI         = (1 << 3),  /*!< Board has SPI support */
+    BSP_BOARD_FEATURE_I2C         = (1 << 4),  /*!< Board has I2C support */
+    BSP_BOARD_FEATURE_CAN         = (1 << 5),  /*!< Board has CAN support */
+    BSP_BOARD_FEATURE_ADC         = (1 << 6),  /*!< Board has ADC support */
+    BSP_BOARD_FEATURE_DAC         = (1 << 7),  /*!< Board has DAC support */
+    BSP_BOARD_FEATURE_TIMER       = (1 << 8),  /*!< Board has TIMER support */
+    BSP_BOARD_FEATURE_RTC         = (1 << 9),  /*!< Board has RTC support */
+    BSP_BOARD_FEATURE_W25QXX      = (1 << 10), /*!< Board has W25QXX support */
+    BSP_BOARD_FEATURE_DMA         = (1 << 11), /*!< Board has DMA support */
+    BSP_BOARD_FEATURE_ETH         = (1 << 12), /*!< Board has ETH support */
+    BSP_BOARD_FEATURE_USB         = (1 << 13), /*!< Board has USB support */
+    BSP_BOARD_FEATURE_SDIO        = (1 << 14), /*!< Board has SDIO support */
+    BSP_BOARD_FEATURE_FSMC        = (1 << 15), /*!< Board has FSMC support */
+} bsp_board_feature_t;
+
+/**
+ * @brief Board hardware information structure
+ */
+typedef struct {
+    uint32_t clock_speed;           /*!< Board clock speed */
+    uint32_t flash_size;            /*!< Flash size in bytes */
+    uint32_t ram_size;              /*!< RAM size in bytes */
+    uint32_t eeprom_size;           /*!< EEPROM size in bytes */
+    uint32_t sram_size;             /*!< SRAM size in bytes */
+    uint8_t  cpu_core;              /*!< CPU core type */
+    uint8_t  cpu_bits;              /*!< CPU bits (32 or 64) */
+} bsp_board_hw_info_t;
+
+/**
+ * @brief Board peripheral configuration structure
+ */
+typedef struct {
+    /* UART configurations */
+    uint8_t uart_count;             /*!< Number of UARTs */
+    const bsp_uart_config_t* uarts; /*!< Pointer to UARTs configuration array */
+    
+    /* SPI configurations */
+    uint8_t spi_count;              /*!< Number of SPIs */
+    const bsp_spi_config_t* spis;   /*!< Pointer to SPIs configuration array */
+    
+    /* I2C configurations */
+    uint8_t i2c_count;              /*!< Number of I2Cs */
+    const bsp_i2c_config_t* i2cs;   /*!< Pointer to I2Cs configuration array */
+    
+    /* CAN configurations */
+    uint8_t can_count;              /*!< Number of CANs */
+    const bsp_can_config_t* cans;   /*!< Pointer to CANs configuration array */
+    
+    /* ADC configurations */
+    uint8_t adc_count;              /*!< Number of ADCs */
+    const bsp_adc_config_t* adcs;   /*!< Pointer to ADCs configuration array */
+} bsp_board_periph_config_t;
+
+/**
+ * @brief Board initialization function pointers structure
+ */
+typedef struct {
+    bsp_periph_init_func_t led_init;        /*!< LED initialization function */
+    bsp_periph_init_func_t button_init;     /*!< Button initialization function */
+    bsp_periph_init_func_t uart_init;       /*!< UART initialization function */
+    bsp_periph_init_func_t spi_init;        /*!< SPI initialization function */
+    bsp_periph_init_func_t i2c_init;        /*!< I2C initialization function */
+    bsp_periph_init_func_t can_init;        /*!< CAN initialization function */
+    bsp_periph_init_func_t adc_init;        /*!< ADC initialization function */
+    bsp_periph_init_func_t w25qxx_init;     /*!< W25QXX initialization function */
+} bsp_board_init_funcs_t;
 
 /**
  * @brief Board configuration structure
  */
 typedef struct {
-    const char* name;
-    bsp_led_config_t led;
-    bsp_buttons_config_t buttons;
-    bsp_uart_config_t uart;
-    bsp_w25qxx_config_t w25qxx;
+    uint32_t version;               /*!< Configuration version */
+    const char* name;               /*!< Board name */
+    const char* description;        /*!< Board description */
+    bsp_board_id_t id;              /*!< Board ID information */
     
-    /* Initialization function pointers */
-    bsp_periph_init_func_t led_init;
-    bsp_periph_init_func_t button_init;
-    bsp_periph_init_func_t uart_init;
-    bsp_periph_init_func_t w25qxx_init;
+    /* Board features */
+    uint32_t features;              /*!< Board feature flags */
+    
+    /* Hardware information */
+    bsp_board_hw_info_t hw_info;    /*!< Hardware information */
+    
+    /* Peripheral configurations */
+    bsp_led_config_t led;           /*!< LED configuration */
+    bsp_buttons_config_t buttons;   /*!< Buttons configuration */
+    bsp_w25qxx_config_t w25qxx;     /*!< W25QXX configuration */
+    
+    /* Peripheral arrays */
+    bsp_board_periph_config_t periphs; /*!< Peripheral configurations */
+    
+    /* Initialization functions */
+    bsp_board_init_funcs_t init_funcs; /*!< Initialization function pointers */
     
     /* Additional board-specific configuration */
-    uint32_t clock_speed;
-    uint8_t uart_count;
+    void* custom_config;            /*!< Custom board configuration pointer */
+    size_t custom_config_size;      /*!< Custom board configuration size */
+    
+    /* Board revision information */
+    uint8_t major_rev;              /*!< Major revision */
+    uint8_t minor_rev;              /*!< Minor revision */
+    uint8_t patch_rev;              /*!< Patch revision */
+    const char* revision_desc;      /*!< Revision description */
 } bsp_board_config_t;
 
 /**
@@ -128,8 +306,9 @@ extern const bsp_board_config_t stm32f407vet6_board_config;
 
 /**
  * @brief Board hardware initialization
+ * @retval HAL status code
  */
-void bsp_board_init(void);
+hal_ret_t bsp_board_init(void);
 
 /**
  * @brief Get board name
@@ -137,4 +316,10 @@ void bsp_board_init(void);
  */
 const char* bsp_board_get_name(void);
 
+/**
+ * @brief Get board configuration
+ * @retval Pointer to board configuration structure
+ */
+const bsp_board_config_t* bsp_board_get_config(void);
+
 #endif /* BSP_BOARD_H */

BSP/Inc/bsp_board_manager.h

@@ -37,16 +37,16 @@ const bsp_board_config_t* bsp_board_get_by_name(const char* name);
 /**
  * @brief Set current board configuration by index
  * @param index: Board configuration index
- * @retval 0 if successful, -1 if invalid index
+ * @retval HAL status code
  */
-int8_t bsp_board_set_by_index(uint8_t index);
+hal_ret_t bsp_board_set_by_index(uint8_t index);
 
 /**
  * @brief Set current board configuration by name
  * @param name: Board name string
- * @retval 0 if successful, -1 if not found
+ * @retval HAL status code
  */
-int8_t bsp_board_set_by_name(const char* name);
+hal_ret_t bsp_board_set_by_name(const char* name);
 
 /**
  * @brief Get current board configuration

BSP/Inc/bsp_config.h

@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * @file           : bsp_config.h
-  * @brief          : Board support package configuration file
+  * @brief          : Board support package configuration file header
   ******************************************************************************
   */
 /* USER CODE END Header */
@@ -10,42 +10,175 @@
 #ifndef BSP_CONFIG_H
 #define BSP_CONFIG_H
 
-#include "hal_gpio.h"
-#include "hal_uart.h"
+#include <stdio.h>
+#include "bsp_module.h"
+#include "bsp_board.h"
+#include "hal.h"
 
 /**
- * @brief Board name definition
+ * @brief BSP configuration file format definitions
  */
-#define BOARD_NAME "STM32F407VET6"
+#define BSP_CONFIG_FILE_VERSION "1.0.0"
+#define BSP_CONFIG_MAX_LINE_LENGTH 256
+#define BSP_CONFIG_MAX_SECTION_NAME_LENGTH 32
+#define BSP_CONFIG_MAX_KEY_NAME_LENGTH 32
+#define BSP_CONFIG_MAX_VALUE_LENGTH 128
 
 /**
- * @brief LED hardware configuration
+ * @brief BSP configuration section type
  */
-#define BSP_LED_PORT    HAL_GPIO_PORT_A
-#define BSP_LED_PIN     HAL_GPIO_PIN_6
+typedef enum {
+    BSP_CONFIG_SECTION_NONE = 0,
+    BSP_CONFIG_SECTION_BOARD,
+    BSP_CONFIG_SECTION_MODULE,
+    BSP_CONFIG_SECTION_PERIPH,
+    BSP_CONFIG_SECTION_MAX
+} bsp_config_section_t;
 
 /**
- * @brief Button hardware configuration
+ * @brief BSP configuration entry
  */
-/* KEY0 - PE4, active low */
-#define BSP_KEY0_PORT   HAL_GPIO_PORT_E
-#define BSP_KEY0_PIN    HAL_GPIO_PIN_4
-
-/* KEY1 - PE3, active low */
-#define BSP_KEY1_PORT   HAL_GPIO_PORT_E
-#define BSP_KEY1_PIN    HAL_GPIO_PIN_3
-
-/* WK_UP - PA0, active high */
-#define BSP_WKUP_PORT   HAL_GPIO_PORT_A
-#define BSP_WKUP_PIN    HAL_GPIO_PIN_0
+typedef struct {
+    const char* section;
+    const char* key;
+    const char* value;
+} bsp_config_entry_t;
 
 /**
- * @brief UART hardware configuration
+ * @brief BSP configuration parser context
  */
-#define BSP_UART_INSTANCE BSP_UART_INSTANCE_1
-#define BSP_UART_BAUDRATE 115200
-#define BSP_UART_PARITY HAL_UART_PARITY_NONE
-#define BSP_UART_STOPBITS HAL_UART_STOPBITS_1
-#define BSP_UART_DATABITS HAL_UART_DATABITS_8
+typedef struct {
+    FILE* file;
+    char current_section[BSP_CONFIG_MAX_SECTION_NAME_LENGTH];
+    char buffer[BSP_CONFIG_MAX_LINE_LENGTH];
+    uint32_t line_number;
+    uint8_t initialized;
+} bsp_config_parser_t;
+
+/**
+ * @brief BSP configuration file operations
+ */
+typedef struct {
+    hal_ret_t (*open)(const char* filename, bsp_config_parser_t* parser);
+    hal_ret_t (*close)(bsp_config_parser_t* parser);
+    hal_ret_t (*read_entry)(bsp_config_parser_t* parser, bsp_config_entry_t* entry);
+    hal_ret_t (*parse_int)(const char* value, int* result);
+    hal_ret_t (*parse_uint)(const char* value, uint32_t* result);
+    hal_ret_t (*parse_bool)(const char* value, uint8_t* result);
+    hal_ret_t (*parse_string)(const char* value, char* result, size_t max_length);
+} bsp_config_ops_t;
+
+/**
+ * @brief Initialize BSP configuration system
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_init(void);
+
+/**
+ * @brief Deinitialize BSP configuration system
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_deinit(void);
+
+/**
+ * @brief Load BSP configuration from file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_load(const char* filename);
+
+/**
+ * @brief Save BSP configuration to file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_save(const char* filename);
+
+/**
+ * @brief Get configuration value
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store value
+ * @param max_length: Maximum length of value buffer
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_value(const char* section, const char* key, char* value, size_t max_length);
+
+/**
+ * @brief Set configuration value
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Configuration value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_value(const char* section, const char* key, const char* value);
+
+/**
+ * @brief Get configuration value as integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_int(const char* section, const char* key, int* value);
+
+/**
+ * @brief Set configuration value as integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_int(const char* section, const char* key, int value);
+
+/**
+ * @brief Get configuration value as unsigned integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store unsigned integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_uint(const char* section, const char* key, uint32_t* value);
+
+/**
+ * @brief Set configuration value as unsigned integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Unsigned integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_uint(const char* section, const char* key, uint32_t value);
+
+/**
+ * @brief Get configuration value as boolean
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store boolean value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_bool(const char* section, const char* key, uint8_t* value);
+
+/**
+ * @brief Set configuration value as boolean
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Boolean value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_bool(const char* section, const char* key, uint8_t value);
+
+/**
+ * @brief Parse BSP modules from configuration
+ * @param config: Pointer to BSP board configuration structure to fill
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_parse_modules(bsp_board_config_t* config);
+
+/**
+ * @brief Initialize BSP from configuration file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_init_from_config(const char* filename);
 
 #endif /* BSP_CONFIG_H */

BSP/Inc/bsp_init.h

@@ -14,13 +14,15 @@
 
 /**
  * @brief Initialize board support package
+ * @retval HAL status code
  */
-void bsp_init(void);
+hal_ret_t bsp_init(void);
 
 /**
  * @brief Initialize board GPIO
+ * @retval HAL status code
  */
-void bsp_gpio_init(void);
+hal_ret_t bsp_gpio_init(void);
 
 /**
  * @brief Get board name

BSP/Inc/bsp_module.h

@@ -0,0 +1,401 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : bsp_module.h
+  * @brief          : Board support package module management header file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#ifndef BSP_MODULE_H
+#define BSP_MODULE_H
+
+#include "hal.h"
+
+/**
+ * @brief BSP module type definitions
+ */
+typedef enum {
+    BSP_MODULE_TYPE_LED = 0,
+    BSP_MODULE_TYPE_BUTTON,
+    BSP_MODULE_TYPE_UART,
+    BSP_MODULE_TYPE_SPI,
+    BSP_MODULE_TYPE_I2C,
+    BSP_MODULE_TYPE_CAN,
+    BSP_MODULE_TYPE_ADC,
+    BSP_MODULE_TYPE_DAC,
+    BSP_MODULE_TYPE_TIMER,
+    BSP_MODULE_TYPE_RTC,
+    BSP_MODULE_TYPE_W25QXX,
+    BSP_MODULE_TYPE_MAX
+} bsp_module_type_t;
+
+/**
+ * @brief BSP module state definitions
+ */
+typedef enum {
+    BSP_MODULE_STATE_UNINIT = 0,
+    BSP_MODULE_STATE_INIT,
+    BSP_MODULE_STATE_CONFIGURED,
+    BSP_MODULE_STATE_RUNNING,
+    BSP_MODULE_STATE_ERROR
+} bsp_module_state_t;
+
+/**
+ * @brief BSP module priority definitions
+ */
+typedef enum {
+    BSP_MODULE_PRIORITY_HIGHEST = 0,
+    BSP_MODULE_PRIORITY_HIGH,
+    BSP_MODULE_PRIORITY_MEDIUM,
+    BSP_MODULE_PRIORITY_LOW,
+    BSP_MODULE_PRIORITY_LOWEST
+} bsp_module_priority_t;
+
+/**
+ * @brief BSP module configuration structure
+ */
+typedef struct bsp_module_config {
+    bsp_module_type_t type;          /*!< Module type */
+    const char* name;               /*!< Module name */
+    bsp_module_priority_t priority;  /*!< Module priority */
+    uint32_t version;               /*!< Module version */
+    uint8_t instance;               /*!< Module instance */
+    uint8_t enable;                 /*!< Module enable flag */
+    void* config_data;              /*!< Module configuration data */
+    size_t config_size;             /*!< Module configuration size */
+    uint32_t dependencies;          /*!< Module dependencies bitmask */
+} bsp_module_config_t;
+
+/**
+ * @brief BSP module operations structure
+ */
+typedef struct {
+    hal_ret_t (*init)(void* config);          /*!< Module initialization function */
+    hal_ret_t (*deinit)(void);               /*!< Module deinitialization function */
+    hal_ret_t (*configure)(void* config);     /*!< Module configuration function */
+    hal_ret_t (*start)(void);                 /*!< Module start function */
+    hal_ret_t (*stop)(void);                  /*!< Module stop function */
+    hal_ret_t (*reset)(void);                 /*!< Module reset function */
+    bsp_module_state_t (*get_state)(void);       /*!< Module get state function */
+    hal_ret_t (*control)(uint32_t cmd, void* param); /*!< Module control function */
+} bsp_module_ops_t;
+
+/**
+ * @brief BSP module version structure
+ */
+typedef struct {
+    uint8_t major;
+    uint8_t minor;
+    uint8_t patch;
+} bsp_module_version_t;
+
+/**
+ * @brief Forward declaration of bsp_module_t
+ */
+typedef struct bsp_module bsp_module_t;
+
+/**
+ * @brief BSP module event callback type
+ */
+typedef hal_ret_t (*bsp_module_event_callback_t)(const bsp_module_t* sender, uint32_t event, void* data);
+
+/**
+ * @brief BSP module structure
+ */
+typedef struct bsp_module {
+    bsp_module_config_t config;      /*!< Module configuration */
+    bsp_module_ops_t ops;            /*!< Module operations */
+    bsp_module_state_t state;        /*!< Module state */
+    bsp_module_version_t version;    /*!< Module version */
+    struct bsp_module* next;         /*!< Pointer to next module in the list */
+    struct bsp_module* prev;         /*!< Pointer to previous module in the list */
+    void* private_data;              /*!< Module private data */
+    bsp_module_event_callback_t event_callback; /*!< Event callback */
+} bsp_module_t;
+
+/**
+ * @brief BSP module event definitions
+ */
+#define BSP_MODULE_EVENT_INIT      (1 << 0)  /*!< Module initialized */
+#define BSP_MODULE_EVENT_DEINIT    (1 << 1)  /*!< Module deinitialized */
+#define BSP_MODULE_EVENT_START     (1 << 2)  /*!< Module started */
+#define BSP_MODULE_EVENT_STOP      (1 << 3)  /*!< Module stopped */
+#define BSP_MODULE_EVENT_ERROR     (1 << 4)  /*!< Module error */
+#define BSP_MODULE_EVENT_CONFIG    (1 << 5)  /*!< Module configured */
+#define BSP_MODULE_EVENT_CUSTOM    (1 << 8)  /*!< Custom module event base */
+
+/**
+ * @brief BSP module auto-registration macros
+ */
+#define BSP_MODULE_REGISTER(module) \
+    static const bsp_module_config_t __bsp_module_##module##_config = { \
+        .type = BSP_MODULE_TYPE_##module, \
+        .name = #module, \
+        .priority = BSP_MODULE_PRIORITY_MEDIUM, \
+        .version = 1, \
+        .instance = 0, \
+        .enable = 1, \
+        .config_data = NULL, \
+        .config_size = 0, \
+        .dependencies = 0 \
+    }; \
+    static bsp_module_t __bsp_module_##module = { \
+        .config = __bsp_module_##module##_config, \
+        .state = BSP_MODULE_STATE_UNINIT, \
+        .version = {1, 0, 0}, \
+        .event_callback = NULL \
+    };
+
+#define BSP_MODULE_REGISTER_FULL(module, type, priority, instance, deps) \
+    static const bsp_module_config_t __bsp_module_##module##_config = { \
+        .type = (type), \
+        .name = #module, \
+        .priority = (priority), \
+        .version = 1, \
+        .instance = (instance), \
+        .enable = 1, \
+        .config_data = NULL, \
+        .config_size = 0, \
+        .dependencies = (deps) \
+    }; \
+    static bsp_module_t __bsp_module_##module = { \
+        .config = __bsp_module_##module##_config, \
+        .state = BSP_MODULE_STATE_UNINIT, \
+        .version = {1, 0, 0}, \
+        .event_callback = NULL \
+    };
+
+#define BSP_MODULE_REGISTER_AT_STARTUP(module) \
+    BSP_MODULE_REGISTER(module) \
+    __attribute__((constructor)) static void __bsp_register_##module##_at_startup(void) { \
+        bsp_module_register(&__bsp_module_##module); \
+    }
+
+/**
+ * @brief BSP module manager structure
+ */
+typedef struct {
+    bsp_module_t* modules[BSP_MODULE_TYPE_MAX]; /*!< Modules by type */
+    bsp_module_t* module_list;       /*!< Linked list of all modules */
+    uint32_t module_count;           /*!< Total number of modules */
+} bsp_module_manager_t;
+
+/**
+ * @brief Initialize BSP module manager
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_manager_init(void);
+
+/**
+ * @brief Register a BSP module
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_register(bsp_module_t* module);
+
+/**
+ * @brief Unregister a BSP module
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_unregister(bsp_module_t* module);
+
+/**
+ * @brief Initialize all registered BSP modules
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_init_all(void);
+
+/**
+ * @brief Deinitialize all registered BSP modules
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_deinit_all(void);
+
+/**
+ * @brief Start all registered BSP modules
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_start_all(void);
+
+/**
+ * @brief Stop all registered BSP modules
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_stop_all(void);
+
+/**
+ * @brief Initialize a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_init(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Deinitialize a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_deinit(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Configure a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param config: Module configuration data
+ * @param size: Module configuration size
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_configure(bsp_module_type_t type, uint8_t instance, void* config, size_t size);
+
+/**
+ * @brief Start a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_start(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Stop a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_stop(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Reset a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_reset(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Get state of a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param state: Pointer to store module state
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_get_state(bsp_module_type_t type, uint8_t instance, bsp_module_state_t* state);
+
+/**
+ * @brief Control a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param cmd: Control command
+ * @param param: Control parameter
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_control(bsp_module_type_t type, uint8_t instance, uint32_t cmd, void* param);
+
+/**
+ * @brief Get a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval Pointer to module structure, or NULL if not found
+ */
+bsp_module_t* bsp_module_get(bsp_module_type_t type, uint8_t instance);
+
+/**
+ * @brief Get all modules of a specific type
+ * @param type: Module type
+ * @retval Pointer to module list, or NULL if no modules found
+ */
+bsp_module_t* bsp_module_get_by_type(bsp_module_type_t type);
+
+/**
+ * @brief Get module by name
+ * @param name: Module name
+ * @retval Pointer to module structure, or NULL if not found
+ */
+bsp_module_t* bsp_module_get_by_name(const char* name);
+
+/**
+ * @brief Get total number of registered modules
+ * @retval Number of registered modules
+ */
+uint32_t bsp_module_get_count(void);
+
+/**
+ * @brief Check if all dependencies of a module are satisfied
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_check_dependencies(const bsp_module_t* module);
+
+/**
+ * @brief Get module manager instance
+ * @retval Pointer to module manager structure
+ */
+bsp_module_manager_t* bsp_module_get_manager(void);
+
+/**
+ * @brief Register a module event callback
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param callback: Event callback function
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_register_event_callback(bsp_module_type_t type, uint8_t instance, bsp_module_event_callback_t callback);
+
+/**
+ * @brief Trigger a module event
+ * @param module: Pointer to module structure
+ * @param event: Event to trigger
+ * @param data: Event data
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_trigger_event(const bsp_module_t* module, uint32_t event, void* data);
+
+/**
+ * @brief Find modules by priority range
+ * @param min_priority: Minimum priority
+ * @param max_priority: Maximum priority
+ * @param count: Pointer to store number of modules found
+ * @retval Pointer to array of module pointers, or NULL if no modules found
+ */
+bsp_module_t** bsp_module_find_by_priority_range(bsp_module_priority_t min_priority, bsp_module_priority_t max_priority, uint32_t* count);
+
+/**
+ * @brief Set module enable/disable state
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param enable: Enable flag
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_set_enable(bsp_module_type_t type, uint8_t instance, uint8_t enable);
+
+/**
+ * @brief Check if module is enabled
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param enable: Pointer to store enable state
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_is_enabled(bsp_module_type_t type, uint8_t instance, uint8_t* enable);
+
+/**
+ * @brief Set module priority
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param priority: New priority
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_set_priority(bsp_module_type_t type, uint8_t instance, bsp_module_priority_t priority);
+
+/**
+ * @brief Get module priority
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param priority: Pointer to store priority
+ * @retval HAL return code
+ */
+hal_ret_t bsp_module_get_priority(bsp_module_type_t type, uint8_t instance, bsp_module_priority_t* priority);
+
+#endif /* BSP_MODULE_H */

BSP/Src/bsp_board_manager.c

@@ -64,30 +64,34 @@ const bsp_board_config_t* bsp_board_get_by_name(const char* name) {
 /**
  * @brief Set current board configuration by index
  * @param index: Board configuration index
- * @retval 0 if successful, -1 if invalid index
+ * @retval HAL status code
  */
-int8_t bsp_board_set_by_index(uint8_t index) {
+hal_ret_t bsp_board_set_by_index(uint8_t index) {
     if (index < bsp_board_get_count()) {
         current_board_index = index;
-        return 0;
+        return HAL_RET_OK;
     }
-    return -1;
+    return HAL_RET_INVALID_PARAM;
 }
 
 /**
  * @brief Set current board configuration by name
  * @param name: Board name string
- * @retval 0 if successful, -1 if not found
+ * @retval HAL status code
  */
-int8_t bsp_board_set_by_name(const char* name) {
+hal_ret_t bsp_board_set_by_name(const char* name) {
+    if (name == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     for (uint8_t i = 0; i < bsp_board_get_count(); i++) {
         if (supported_boards[i]->name != NULL && 
             strcmp(supported_boards[i]->name, name) == 0) {
             current_board_index = i;
-            return 0;
+            return HAL_RET_OK;
         }
     }
-    return -1;
+    return HAL_RET_ERROR;
 }
 
 /**

BSP/Src/bsp_config.c

@@ -0,0 +1,653 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : bsp_config.c
+  * @brief          : Board support package configuration file source
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#include "bsp_config.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+/**
+ * @brief Configuration storage entry
+ */
+typedef struct bsp_config_storage_entry {
+    char section[BSP_CONFIG_MAX_SECTION_NAME_LENGTH];
+    char key[BSP_CONFIG_MAX_KEY_NAME_LENGTH];
+    char value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    struct bsp_config_storage_entry* next;
+} bsp_config_storage_entry_t;
+
+/**
+ * @brief Configuration storage
+ */
+typedef struct {
+    bsp_config_storage_entry_t* entries;
+    uint32_t entry_count;
+    uint8_t initialized;
+} bsp_config_storage_t;
+
+/**
+ * @brief Configuration storage instance
+ */
+static bsp_config_storage_t bsp_config_storage = {
+    .entries = NULL,
+    .entry_count = 0,
+    .initialized = 0
+};
+
+/**
+ * @brief Trim whitespace from a string
+ * @param str: String to trim
+ * @return Trimmed string
+ */
+static char* bsp_config_trim(char* str) {
+    char* end;
+    
+    // Trim leading whitespace
+    while (isspace((unsigned char)*str)) {
+        str++;
+    }
+    
+    if (*str == 0) {
+        return str;
+    }
+    
+    // Trim trailing whitespace
+    end = str + strlen(str) - 1;
+    while (end > str && isspace((unsigned char)*end)) {
+        end--;
+    }
+    
+    // Null terminate
+    *(end + 1) = 0;
+    
+    return str;
+}
+
+/**
+ * @brief Open configuration file
+ * @param filename: Configuration file name
+ * @param parser: Parser context
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_file_open(const char* filename, bsp_config_parser_t* parser) {
+    if (filename == NULL || parser == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    parser->file = fopen(filename, "r");
+    if (parser->file == NULL) {
+        return HAL_ERROR;
+    }
+    
+    memset(parser->current_section, 0, sizeof(parser->current_section));
+    memset(parser->buffer, 0, sizeof(parser->buffer));
+    parser->line_number = 0;
+    parser->initialized = 1;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Close configuration file
+ * @param parser: Parser context
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_file_close(bsp_config_parser_t* parser) {
+    if (parser == NULL || !parser->initialized) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (parser->file != NULL) {
+        fclose(parser->file);
+        parser->file = NULL;
+    }
+    
+    parser->initialized = 0;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Read a configuration entry from file
+ * @param parser: Parser context
+ * @param entry: Configuration entry
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_file_read_entry(bsp_config_parser_t* parser, bsp_config_entry_t* entry) {
+    if (parser == NULL || entry == NULL || !parser->initialized) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (parser->file == NULL) {
+        return HAL_ERROR;
+    }
+    
+    while (fgets(parser->buffer, sizeof(parser->buffer), parser->file) != NULL) {
+        parser->line_number++;
+        
+        char* line = bsp_config_trim(parser->buffer);
+        size_t len = strlen(line);
+        
+        // Skip empty lines and comments
+        if (len == 0 || line[0] == '#') {
+            continue;
+        }
+        
+        // Check for section header
+        if (line[0] == '[' && line[len - 1] == ']') {
+            // Extract section name
+            memset(parser->current_section, 0, sizeof(parser->current_section));
+            strncpy(parser->current_section, line + 1, len - 2);
+            parser->current_section[len - 2] = '\0';
+            continue;
+        }
+        
+        // Check for key-value pair
+        char* equals = strchr(line, '=');
+        if (equals != NULL) {
+            // Extract key and value
+            *equals = '\0';
+            char* key = bsp_config_trim(line);
+            char* value = bsp_config_trim(equals + 1);
+            
+            entry->section = parser->current_section;
+            entry->key = key;
+            entry->value = value;
+            
+            return HAL_OK;
+        }
+    }
+    
+    return HAL_TIMEOUT;
+}
+
+/**
+ * @brief Parse integer value
+ * @param value: String value to parse
+ * @param result: Pointer to store result
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_parse_int(const char* value, int* result) {
+    if (value == NULL || result == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    char* endptr;
+    long val = strtol(value, &endptr, 0);
+    
+    if (*endptr != '\0') {
+        return HAL_ERROR;
+    }
+    
+    *result = (int)val;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Parse unsigned integer value
+ * @param value: String value to parse
+ * @param result: Pointer to store result
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_parse_uint(const char* value, uint32_t* result) {
+    if (value == NULL || result == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    char* endptr;
+    unsigned long val = strtoul(value, &endptr, 0);
+    
+    if (*endptr != '\0') {
+        return HAL_ERROR;
+    }
+    
+    *result = (uint32_t)val;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Parse boolean value
+ * @param value: String value to parse
+ * @param result: Pointer to store result
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_parse_bool(const char* value, uint8_t* result) {
+    if (value == NULL || result == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (strcmp(value, "true") == 0 || strcmp(value, "TRUE") == 0 || 
+        strcmp(value, "1") == 0 || strcmp(value, "yes") == 0 || 
+        strcmp(value, "YES") == 0) {
+        *result = 1;
+        return HAL_OK;
+    } else if (strcmp(value, "false") == 0 || strcmp(value, "FALSE") == 0 || 
+               strcmp(value, "0") == 0 || strcmp(value, "no") == 0 || 
+               strcmp(value, "NO") == 0) {
+        *result = 0;
+        return HAL_OK;
+    }
+    
+    return HAL_ERROR;
+}
+
+/**
+ * @brief Parse string value
+ * @param value: String value to parse
+ * @param result: Pointer to store result
+ * @param max_length: Maximum length of result buffer
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_parse_string(const char* value, char* result, size_t max_length) {
+    if (value == NULL || result == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    strncpy(result, value, max_length - 1);
+    result[max_length - 1] = '\0';
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Add a configuration entry to storage
+ * @param section: Section name
+ * @param key: Key name
+ * @param value: Value
+ * @retval HAL status code
+ */
+static hal_ret_t bsp_config_storage_add(const char* section, const char* key, const char* value) {
+    // Check if entry already exists
+    bsp_config_storage_entry_t* entry = bsp_config_storage.entries;
+    while (entry != NULL) {
+        if (strcmp(entry->section, section) == 0 && strcmp(entry->key, key) == 0) {
+            // Update existing entry
+            strncpy(entry->value, value, sizeof(entry->value) - 1);
+            entry->value[sizeof(entry->value) - 1] = '\0';
+            return HAL_OK;
+        }
+        entry = entry->next;
+    }
+    
+    // Create new entry
+    bsp_config_storage_entry_t* new_entry = malloc(sizeof(bsp_config_storage_entry_t));
+    if (new_entry == NULL) {
+        return HAL_OUT_OF_MEMORY;
+    }
+    
+    strncpy(new_entry->section, section, sizeof(new_entry->section) - 1);
+    strncpy(new_entry->key, key, sizeof(new_entry->key) - 1);
+    strncpy(new_entry->value, value, sizeof(new_entry->value) - 1);
+    new_entry->section[sizeof(new_entry->section) - 1] = '\0';
+    new_entry->key[sizeof(new_entry->key) - 1] = '\0';
+    new_entry->value[sizeof(new_entry->value) - 1] = '\0';
+    new_entry->next = NULL;
+    
+    // Add to list
+    if (bsp_config_storage.entries == NULL) {
+        bsp_config_storage.entries = new_entry;
+    } else {
+        entry = bsp_config_storage.entries;
+        while (entry->next != NULL) {
+            entry = entry->next;
+        }
+        entry->next = new_entry;
+    }
+    
+    bsp_config_storage.entry_count++;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Clear configuration storage
+ */
+static void bsp_config_storage_clear(void) {
+    bsp_config_storage_entry_t* entry = bsp_config_storage.entries;
+    while (entry != NULL) {
+        bsp_config_storage_entry_t* next = entry->next;
+        free(entry);
+        entry = next;
+    }
+    
+    bsp_config_storage.entries = NULL;
+    bsp_config_storage.entry_count = 0;
+}
+
+/**
+ * @brief Initialize BSP configuration system
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_init(void) {
+    if (bsp_config_storage.initialized) {
+        return HAL_OK;
+    }
+    
+    bsp_config_storage_clear();
+    bsp_config_storage.initialized = 1;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Deinitialize BSP configuration system
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_deinit(void) {
+    if (!bsp_config_storage.initialized) {
+        return HAL_OK;
+    }
+    
+    bsp_config_storage_clear();
+    bsp_config_storage.initialized = 0;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Load BSP configuration from file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_load(const char* filename) {
+    if (!bsp_config_storage.initialized) {
+        hal_ret_t status = bsp_config_init();
+        if (status != HAL_OK) {
+            return status;
+        }
+    }
+    
+    bsp_config_parser_t parser;
+    hal_ret_t status = bsp_config_file_open(filename, &parser);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    bsp_config_entry_t entry;
+    while ((status = bsp_config_file_read_entry(&parser, &entry)) == HAL_OK) {
+        status = bsp_config_storage_add(entry.section, entry.key, entry.value);
+        if (status != HAL_OK) {
+            bsp_config_file_close(&parser);
+            return status;
+        }
+    }
+    
+    if (status != HAL_TIMEOUT) {
+        bsp_config_file_close(&parser);
+        return status;
+    }
+    
+    status = bsp_config_file_close(&parser);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Save BSP configuration to file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_save(const char* filename) {
+    if (!bsp_config_storage.initialized || bsp_config_storage.entry_count == 0) {
+        return HAL_OK;
+    }
+    
+    FILE* file = fopen(filename, "w");
+    if (file == NULL) {
+        return HAL_ERROR;
+    }
+    
+    fprintf(file, "# BSP Configuration File\n");
+    fprintf(file, "# Version: %s\n\n", BSP_CONFIG_FILE_VERSION);
+    
+    char current_section[BSP_CONFIG_MAX_SECTION_NAME_LENGTH] = "";
+    bsp_config_storage_entry_t* entry = bsp_config_storage.entries;
+    
+    while (entry != NULL) {
+        if (strcmp(entry->section, current_section) != 0) {
+            // New section
+            strncpy(current_section, entry->section, sizeof(current_section) - 1);
+            fprintf(file, "[%s]\n", current_section);
+        }
+        
+        fprintf(file, "%s=%s\n", entry->key, entry->value);
+        entry = entry->next;
+    }
+    
+    fclose(file);
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Get configuration value
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store value
+ * @param max_length: Maximum length of value buffer
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_value(const char* section, const char* key, char* value, size_t max_length) {
+    if (!bsp_config_storage.initialized || section == NULL || key == NULL || value == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    bsp_config_storage_entry_t* entry = bsp_config_storage.entries;
+    while (entry != NULL) {
+        if (strcmp(entry->section, section) == 0 && strcmp(entry->key, key) == 0) {
+            strncpy(value, entry->value, max_length - 1);
+            value[max_length - 1] = '\0';
+            return HAL_OK;
+        }
+        entry = entry->next;
+    }
+    
+    return HAL_NOT_SUPPORTED;
+}
+
+/**
+ * @brief Set configuration value
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Configuration value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_value(const char* section, const char* key, const char* value) {
+    if (!bsp_config_storage.initialized || section == NULL || key == NULL || value == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    return bsp_config_storage_add(section, key, value);
+}
+
+/**
+ * @brief Get configuration value as integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_int(const char* section, const char* key, int* value) {
+    char str_value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    hal_ret_t status = bsp_config_get_value(section, key, str_value, sizeof(str_value));
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return bsp_config_parse_int(str_value, value);
+}
+
+/**
+ * @brief Set configuration value as integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_int(const char* section, const char* key, int value) {
+    char str_value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    snprintf(str_value, sizeof(str_value), "%d", value);
+    return bsp_config_set_value(section, key, str_value);
+}
+
+/**
+ * @brief Get configuration value as unsigned integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store unsigned integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_uint(const char* section, const char* key, uint32_t* value) {
+    char str_value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    hal_status_t status = bsp_config_get_value(section, key, str_value, sizeof(str_value));
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return bsp_config_parse_uint(str_value, value);
+}
+
+/**
+ * @brief Set configuration value as unsigned integer
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Unsigned integer value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_uint(const char* section, const char* key, uint32_t value) {
+    char str_value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    snprintf(str_value, sizeof(str_value), "%lu", (unsigned long)value);
+    return bsp_config_set_value(section, key, str_value);
+}
+
+/**
+ * @brief Get configuration value as boolean
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Pointer to store boolean value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_get_bool(const char* section, const char* key, uint8_t* value) {
+    char str_value[BSP_CONFIG_MAX_VALUE_LENGTH];
+    hal_status_t status = bsp_config_get_value(section, key, str_value, sizeof(str_value));
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return bsp_config_parse_bool(str_value, value);
+}
+
+/**
+ * @brief Set configuration value as boolean
+ * @param section: Configuration section name
+ * @param key: Configuration key name
+ * @param value: Boolean value
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_set_bool(const char* section, const char* key, uint8_t value) {
+    return bsp_config_set_value(section, key, value ? "true" : "false");
+}
+
+/**
+ * @brief Parse BSP modules from configuration
+ * @param config: Pointer to BSP board configuration structure to fill
+ * @retval HAL status code
+ */
+hal_ret_t bsp_config_parse_modules(bsp_board_config_t* config) {
+    if (config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    // TODO: Implement module parsing logic
+    // This will depend on the specific configuration file format
+    // and how modules are defined in the configuration
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Initialize BSP from configuration file
+ * @param filename: Configuration file name
+ * @retval HAL status code
+ */
+hal_ret_t bsp_init_from_config(const char* filename) {
+    // Load configuration file
+    hal_ret_t status = bsp_config_load(filename);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Initialize HAL layer
+    status = hal_init();
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Initialize BSP module manager
+    status = bsp_module_manager_init();
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Create board configuration from file
+    bsp_board_config_t board_config;
+    memset(&board_config, 0, sizeof(board_config));
+    
+    // Parse board information
+    char board_name[64];
+    status = bsp_config_get_value("board", "name", board_name, sizeof(board_name));
+    if (status == HAL_OK) {
+        board_config.name = strdup(board_name);
+    } else {
+        board_config.name = "Unknown";
+    }
+    
+    uint32_t version = BSP_CONFIG_VERSION;
+    status = bsp_config_get_uint("board", "version", &version);
+    if (status == HAL_OK) {
+        board_config.version = version;
+    } else {
+        board_config.version = BSP_CONFIG_VERSION;
+    }
+    
+    // Parse modules from configuration
+    status = bsp_config_parse_modules(&board_config);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Initialize board
+    status = bsp_board_init();
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Initialize all modules
+    status = bsp_module_init_all();
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    // Configure all modules
+    // TODO: Implement module configuration from file
+    
+    // Start all modules
+    status = bsp_module_start_all();
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return HAL_OK;
+}

BSP/Src/bsp_init.c

@@ -16,20 +16,29 @@
 
 /**
  * @brief Initialize board support package
+ * @retval HAL status code
  */
-void bsp_init(void) {
+hal_ret_t bsp_init(void) {
     /* Get board configuration */
     const bsp_board_config_t* board_config = bsp_board_get_config();
+    hal_ret_t status = HAL_RET_OK;
+    uint8_t i;
     
     /* Initialize HAL layer */
-    hal_init();
+    status = hal_init();
+    if (status != HAL_RET_OK) {
+        return status;
+    }
     
     /* Initialize peripherals based on configuration */
     
     /* Initialize LED */
-    if (board_config->led_init != NULL) {
-        board_config->led_init(&board_config->led);
-    } else {
+    if (board_config->led.enable && board_config->init_funcs.led_init != NULL) {
+        status = board_config->init_funcs.led_init(&board_config->led);
+        if (status != HAL_RET_OK) {
+            return status;
+        }
+    } else if (board_config->led.enable) {
         /* Use default initialization if no function provided */
         hal_gpio_config_t gpio_config = {
             .port = board_config->led.port,
@@ -38,34 +47,103 @@ void bsp_init(void) {
             .speed = board_config->led.speed,
             .pull = board_config->led.pull
         };
-        hal_gpio_configure_pin(&gpio_config);
+        status = hal_gpio_configure_pin(&gpio_config);
+        if (status != HAL_RET_OK) {
+            return status;
+        }
     }
     
     /* Initialize Buttons */
-    if (board_config->button_init != NULL) {
-        board_config->button_init(&board_config->buttons);
+    if (board_config->buttons.enable && board_config->init_funcs.button_init != NULL) {
+        status = board_config->init_funcs.button_init(&board_config->buttons);
+        if (status != HAL_RET_OK) {
+            return status;
+        }
     }
     
-    /* Initialize UART */
-    if (board_config->uart_init != NULL) {
-        board_config->uart_init(&board_config->uart);
+    /* Initialize UARTs */
+    if (board_config->init_funcs.uart_init != NULL) {
+        for (i = 0; i < board_config->periphs.uart_count; i++) {
+            if (board_config->periphs.uarts[i].enable) {
+                status = board_config->init_funcs.uart_init(&board_config->periphs.uarts[i]);
+                if (status != HAL_RET_OK) {
+                    return status;
+                }
+            }
+        }
     }
     
-    /* Initialize W25QXX if available */
-    if (board_config->w25qxx_init != NULL) {
-        board_config->w25qxx_init(&board_config->w25qxx);
+    /* Initialize SPIs */
+    if (board_config->init_funcs.spi_init != NULL) {
+        for (i = 0; i < board_config->periphs.spi_count; i++) {
+            if (board_config->periphs.spis[i].enable) {
+                status = board_config->init_funcs.spi_init(&board_config->periphs.spis[i]);
+                if (status != HAL_RET_OK) {
+                    return status;
                 }
+            }
+        }
+    }
+    
+    /* Initialize I2Cs */
+    if (board_config->init_funcs.i2c_init != NULL) {
+        for (i = 0; i < board_config->periphs.i2c_count; i++) {
+            if (board_config->periphs.i2cs[i].enable) {
+                status = board_config->init_funcs.i2c_init(&board_config->periphs.i2cs[i]);
+                if (status != HAL_RET_OK) {
+                    return status;
+                }
+            }
+        }
+    }
+    
+    /* Initialize CANs */
+    if (board_config->init_funcs.can_init != NULL) {
+        for (i = 0; i < board_config->periphs.can_count; i++) {
+            if (board_config->periphs.cans[i].enable) {
+                status = board_config->init_funcs.can_init(&board_config->periphs.cans[i]);
+                if (status != HAL_RET_OK) {
+                    return status;
+                }
+            }
+        }
+    }
+    
+    /* Initialize ADCs */
+    if (board_config->init_funcs.adc_init != NULL) {
+        for (i = 0; i < board_config->periphs.adc_count; i++) {
+            if (board_config->periphs.adcs[i].enable) {
+                status = board_config->init_funcs.adc_init(&board_config->periphs.adcs[i]);
+                if (status != HAL_RET_OK) {
+                    return status;
+                }
+            }
+        }
+    }
+    
+    /* Initialize W25QXX if available and enabled */
+    if (board_config->w25qxx.enable && board_config->init_funcs.w25qxx_init != NULL) {
+        status = board_config->init_funcs.w25qxx_init(&board_config->w25qxx);
+        if (status != HAL_RET_OK) {
+            return status;
+        }
+    }
+    
+    return status;
 }
 
 /**
  * @brief Initialize board GPIO using configuration
+ * @retval HAL status code
  */
-void bsp_gpio_init(void) {
+hal_ret_t bsp_gpio_init(void) {
     /* Get board configuration */
     const bsp_board_config_t* board_config = bsp_board_get_config();
+    hal_ret_t status = HAL_RET_OK;
     uint8_t i;
     
     /* Initialize LED GPIO */
+    if (board_config->led.enable) {
         hal_gpio_config_t gpio_config = {
             .port = board_config->led.port,
             .pin = board_config->led.pin,
@@ -73,18 +151,100 @@ void bsp_gpio_init(void) {
             .speed = board_config->led.speed,
             .pull = board_config->led.pull
         };
-    hal_gpio_configure_pin(&gpio_config);
+        status = hal_gpio_configure_pin(&gpio_config);
+        if (status != HAL_RET_OK) {
+            return status;
+        }
+    }
     
     /* Initialize Buttons GPIO */
+    if (board_config->buttons.enable) {
         for (i = 0; i < board_config->buttons.count; i++) {
             const bsp_button_config_t* button = &board_config->buttons.buttons[i];
-        gpio_config.port = button->port;
-        gpio_config.pin = button->pin;
-        gpio_config.mode = button->mode;
-        gpio_config.speed = button->speed;
-        gpio_config.pull = button->pull;
-        hal_gpio_configure_pin(&gpio_config);
+            hal_gpio_config_t gpio_config = {
+                .port = button->port,
+                .pin = button->pin,
+                .mode = button->mode,
+                .speed = button->speed,
+                .pull = button->pull
+            };
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
             }
+        }
+    }
+    
+    /* Initialize UART GPIOs */
+    for (i = 0; i < board_config->periphs.uart_count; i++) {
+        if (board_config->periphs.uarts[i].enable) {
+            /* Initialize TX pin */
+            hal_gpio_config_t gpio_config = {
+                .port = board_config->periphs.uarts[i].tx_port,
+                .pin = board_config->periphs.uarts[i].tx_pin,
+                .mode = HAL_GPIO_MODE_AF_PP,
+                .speed = HAL_GPIO_SPEED_HIGH,
+                .pull = HAL_GPIO_PULL_NO
+            };
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
+            }
+            
+            /* Initialize RX pin */
+            gpio_config.port = board_config->periphs.uarts[i].rx_port;
+            gpio_config.pin = board_config->periphs.uarts[i].rx_pin;
+            gpio_config.mode = HAL_GPIO_MODE_AF_PP;
+            gpio_config.speed = HAL_GPIO_SPEED_HIGH;
+            gpio_config.pull = HAL_GPIO_PULL_UP;
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
+            }
+        }
+    }
+    
+    /* Initialize SPI GPIOs */
+    for (i = 0; i < board_config->periphs.spi_count; i++) {
+        if (board_config->periphs.spis[i].enable) {
+            /* Initialize SCK pin */
+            hal_gpio_config_t gpio_config = {
+                .port = board_config->periphs.spis[i].sck_port,
+                .pin = board_config->periphs.spis[i].sck_pin,
+                .mode = HAL_GPIO_MODE_AF_PP,
+                .speed = HAL_GPIO_SPEED_HIGH,
+                .pull = HAL_GPIO_PULL_NO
+            };
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
+            }
+            
+            /* Initialize MISO pin */
+            gpio_config.port = board_config->periphs.spis[i].miso_port;
+            gpio_config.pin = board_config->periphs.spis[i].miso_pin;
+            gpio_config.mode = HAL_GPIO_MODE_AF_PP;
+            gpio_config.speed = HAL_GPIO_SPEED_HIGH;
+            gpio_config.pull = HAL_GPIO_PULL_UP;
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
+            }
+            
+            /* Initialize MOSI pin */
+            gpio_config.port = board_config->periphs.spis[i].mosi_port;
+            gpio_config.pin = board_config->periphs.spis[i].mosi_pin;
+            gpio_config.mode = HAL_GPIO_MODE_AF_PP;
+            gpio_config.speed = HAL_GPIO_SPEED_HIGH;
+            gpio_config.pull = HAL_GPIO_PULL_NO;
+            status = hal_gpio_configure_pin(&gpio_config);
+            if (status != HAL_RET_OK) {
+                return status;
+            }
+        }
+    }
+    
+    return status;
 }
 
 /**

BSP/Src/bsp_key.c

@@ -156,8 +156,8 @@ void bsp_key_init(void) {
     }
     
     /* Call board-specific button initialization if available */
-    if (board_config && board_config->button_init) {
-        board_config->button_init(&board_config->buttons);
+    if (board_config && board_config->init_funcs.button_init) {
+        board_config->init_funcs.button_init(&board_config->buttons);
     }
 }
 

BSP/Src/bsp_module.c

@@ -0,0 +1,795 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : bsp_module.c
+  * @brief          : Board support package module management source file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#include "bsp_module.h"
+#include <string.h>
+
+/**
+ * @brief Module manager instance
+ */
+static bsp_module_manager_t bsp_module_manager;
+
+/**
+ * @brief Initialize BSP module manager
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_manager_init(void) {
+    /* Clear module manager */
+    memset(&bsp_module_manager, 0, sizeof(bsp_module_manager));
+    
+    /* Initialize module arrays */
+    for (uint8_t i = 0; i < BSP_MODULE_TYPE_MAX; i++) {
+        bsp_module_manager.modules[i] = NULL;
+    }
+    
+    bsp_module_manager.module_list = NULL;
+    bsp_module_manager.module_count = 0;
+    
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Register a BSP module
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_register(bsp_module_t* module) {
+    if (module == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (module->config.type >= BSP_MODULE_TYPE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Check if module already exists */
+    if (bsp_module_get(module->config.type, module->config.instance) != NULL) {
+        return HAL_RESOURCE_LOCKED;
+    }
+    
+    /* Initialize module state */
+    module->state = BSP_MODULE_STATE_UNINIT;
+    module->next = NULL;
+    module->prev = NULL;
+    
+    /* Add module to the linked list */
+    if (bsp_module_manager.module_list == NULL) {
+        bsp_module_manager.module_list = module;
+    } else {
+        /* Insert module at the end of the list */
+        bsp_module_t* current = bsp_module_manager.module_list;
+        while (current->next != NULL) {
+            current = current->next;
+        }
+        current->next = module;
+        module->prev = current;
+    }
+    
+    /* Add module to the type-specific list */
+    if (bsp_module_manager.modules[module->config.type] == NULL) {
+        bsp_module_manager.modules[module->config.type] = module;
+    } else {
+        /* Insert module at the end of the type-specific list */
+        bsp_module_t* current = bsp_module_manager.modules[module->config.type];
+        while (current->next != NULL && current->config.type == module->config.type) {
+            current = current->next;
+        }
+        if (current->config.type == module->config.type) {
+            current->next = module;
+            module->prev = current;
+        } else {
+            /* Insert between current->prev and current */
+            if (current->prev != NULL) {
+                current->prev->next = module;
+            } else {
+                bsp_module_manager.modules[module->config.type] = module;
+            }
+            module->prev = current->prev;
+            module->next = current;
+            current->prev = module;
+        }
+    }
+    
+    bsp_module_manager.module_count++;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Unregister a BSP module
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_unregister(bsp_module_t* module) {
+    if (module == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Deinitialize module if it's initialized */
+    if (module->state != BSP_MODULE_STATE_UNINIT) {
+        if (module->ops.deinit != NULL) {
+            module->ops.deinit();
+        }
+        module->state = BSP_MODULE_STATE_UNINIT;
+    }
+    
+    /* Remove module from linked list */
+    if (module->prev != NULL) {
+        module->prev->next = module->next;
+    } else {
+        /* Module is first in the list */
+        bsp_module_manager.module_list = module->next;
+    }
+    
+    if (module->next != NULL) {
+        module->next->prev = module->prev;
+    }
+    
+    /* Remove module from type-specific list */
+    if (bsp_module_manager.modules[module->config.type] == module) {
+        bsp_module_manager.modules[module->config.type] = module->next;
+    }
+    
+    /* Reset module pointers */
+    module->next = NULL;
+    module->prev = NULL;
+    
+    bsp_module_manager.module_count--;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Get a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval Pointer to module structure, or NULL if not found
+ */
+bsp_module_t* bsp_module_get(bsp_module_type_t type, uint8_t instance) {
+    if (type >= BSP_MODULE_TYPE_MAX) {
+        return NULL;
+    }
+    
+    bsp_module_t* current = bsp_module_manager.modules[type];
+    while (current != NULL && current->config.type == type) {
+        if (current->config.instance == instance) {
+            return current;
+        }
+        current = current->next;
+    }
+    
+    return NULL;
+}
+
+/**
+ * @brief Get all modules of a specific type
+ * @param type: Module type
+ * @retval Pointer to module list, or NULL if no modules found
+ */
+bsp_module_t* bsp_module_get_by_type(bsp_module_type_t type) {
+    if (type >= BSP_MODULE_TYPE_MAX) {
+        return NULL;
+    }
+    
+    return bsp_module_manager.modules[type];
+}
+
+/**
+ * @brief Get module by name
+ * @param name: Module name
+ * @retval Pointer to module structure, or NULL if not found
+ */
+bsp_module_t* bsp_module_get_by_name(const char* name) {
+    if (name == NULL) {
+        return NULL;
+    }
+    
+    bsp_module_t* current = bsp_module_manager.module_list;
+    while (current != NULL) {
+        if (current->config.name != NULL && strcmp(current->config.name, name) == 0) {
+            return current;
+        }
+        current = current->next;
+    }
+    
+    return NULL;
+}
+
+/**
+ * @brief Check if all dependencies of a module are satisfied
+ * @param module: Pointer to module structure
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_check_dependencies(const bsp_module_t* module) {
+    if (module == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Check if dependencies are satisfied */
+    if (module->config.dependencies == 0) {
+        /* No dependencies */
+        return HAL_OK;
+    }
+    
+    /* Check each dependency bit */
+    for (uint8_t i = 0; i < BSP_MODULE_TYPE_MAX; i++) {
+        if (module->config.dependencies & (1 << i)) {
+            /* Check if dependency module exists and is initialized */
+            bsp_module_t* dep_module = bsp_module_manager.modules[i];
+            if (dep_module == NULL) {
+                return HAL_RET_ERROR;
+            }
+            
+            /* Check if at least one instance is initialized */
+            bsp_module_t* current = dep_module;
+            uint8_t dep_found = 0;
+            while (current != NULL && current->config.type == i) {
+                if (current->state >= BSP_MODULE_STATE_INIT) {
+                    dep_found = 1;
+                    break;
+                }
+                current = current->next;
+            }
+            
+            if (!dep_found) {
+                return HAL_ERROR;
+            }
+        }
+    }
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Initialize a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_init(bsp_module_type_t type, uint8_t instance) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is already initialized */
+    if (module->state != BSP_MODULE_STATE_UNINIT) {
+        return HAL_OK;
+    }
+    
+    /* Check dependencies */
+    hal_ret_t status = bsp_module_check_dependencies(module);
+    if (status != HAL_OK) {
+        module->state = BSP_MODULE_STATE_ERROR;
+        return status;
+    }
+    
+    /* Initialize module */
+    if (module->ops.init != NULL) {
+        status = module->ops.init(module->config.config_data);
+        if (status != HAL_OK) {
+            module->state = BSP_MODULE_STATE_ERROR;
+            return status;
+        }
+    }
+    
+    module->state = BSP_MODULE_STATE_INIT;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Deinitialize a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_deinit(bsp_module_type_t type, uint8_t instance) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is already uninitialized */
+    if (module->state == BSP_MODULE_STATE_UNINIT) {
+        return HAL_OK;
+    }
+    
+    /* Stop module if it's running */
+    if (module->state == BSP_MODULE_STATE_RUNNING && module->ops.stop != NULL) {
+        module->ops.stop();
+    }
+    
+    /* Deinitialize module */
+    if (module->ops.deinit != NULL) {
+        hal_ret_t status = module->ops.deinit();
+        if (status != HAL_OK) {
+            module->state = BSP_MODULE_STATE_ERROR;
+            return status;
+        }
+    }
+    
+    module->state = BSP_MODULE_STATE_UNINIT;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Configure a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param config: Module configuration data
+ * @param size: Module configuration size
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_configure(bsp_module_type_t type, uint8_t instance, void* config, size_t size) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is initialized */
+    if (module->state < BSP_MODULE_STATE_INIT) {
+        return HAL_ERROR;
+    }
+    
+    /* Configure module */
+    if (module->ops.configure != NULL) {
+        hal_ret_t status = module->ops.configure(config);
+        if (status != HAL_OK) {
+            module->state = BSP_MODULE_STATE_ERROR;
+            return status;
+        }
+    }
+    
+    module->state = BSP_MODULE_STATE_CONFIGURED;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Start a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_start(bsp_module_type_t type, uint8_t instance) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is configured */
+    if (module->state < BSP_MODULE_STATE_CONFIGURED) {
+        return HAL_ERROR;
+    }
+    
+    /* Start module */
+    if (module->ops.start != NULL) {
+        hal_ret_t status = module->ops.start();
+        if (status != HAL_OK) {
+            module->state = BSP_MODULE_STATE_ERROR;
+            return status;
+        }
+    }
+    
+    module->state = BSP_MODULE_STATE_RUNNING;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Stop a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_stop(bsp_module_type_t type, uint8_t instance) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is running */
+    if (module->state != BSP_MODULE_STATE_RUNNING) {
+        return HAL_OK;
+    }
+    
+    /* Stop module */
+    if (module->ops.stop != NULL) {
+        hal_ret_t status = module->ops.stop();
+        if (status != HAL_OK) {
+            module->state = BSP_MODULE_STATE_ERROR;
+            return status;
+        }
+    }
+    
+    module->state = BSP_MODULE_STATE_CONFIGURED;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Reset a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_reset(bsp_module_type_t type, uint8_t instance) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Stop module if it's running */
+    hal_ret_t status = bsp_module_stop(type, instance);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    /* Deinitialize module */
+    status = bsp_module_deinit(type, instance);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    /* Reinitialize module */
+    status = bsp_module_init(type, instance);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    /* Configure module */
+    if (module->config.config_data != NULL) {
+        status = bsp_module_configure(type, instance, module->config.config_data, module->config.config_size);
+        if (status != HAL_OK) {
+            return status;
+        }
+    }
+    
+    /* Start module */
+    status = bsp_module_start(type, instance);
+    if (status != HAL_OK) {
+        return status;
+    }
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Get state of a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param state: Pointer to store module state
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_get_state(bsp_module_type_t type, uint8_t instance, bsp_module_state_t* state) {
+    if (state == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        *state = BSP_MODULE_STATE_UNINIT;
+        return HAL_ERROR;
+    }
+    
+    *state = module->state;
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Control a specific BSP module
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param cmd: Control command
+ * @param param: Control parameter
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_control(bsp_module_type_t type, uint8_t instance, uint32_t cmd, void* param) {
+    /* Get module */
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    /* Check if module is initialized */
+    if (module->state < BSP_MODULE_STATE_INIT) {
+        return HAL_ERROR;
+    }
+    
+    /* Control module */
+    if (module->ops.control != NULL) {
+        return module->ops.control(cmd, param);
+    }
+    
+    return HAL_RET_NOT_SUPPORTED;
+}
+
+/**
+ * @brief Initialize all registered BSP modules in priority order
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_init_all(void) {
+    hal_ret_t status = HAL_RET_OK;
+    
+    /* Initialize modules by priority */
+    for (uint8_t priority = BSP_MODULE_PRIORITY_HIGHEST; priority <= BSP_MODULE_PRIORITY_LOWEST; priority++) {
+        bsp_module_t* current = bsp_module_manager.module_list;
+        while (current != NULL) {
+            if (current->config.priority == priority) {
+                status = bsp_module_init(current->config.type, current->config.instance);
+                if (status != HAL_OK) {
+                    return status;
+                }
+            }
+            current = current->next;
+        }
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Deinitialize all registered BSP modules in reverse priority order
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_deinit_all(void) {
+    hal_status_t status = HAL_OK;
+    
+    /* Deinitialize modules by reverse priority */
+    for (int8_t priority = BSP_MODULE_PRIORITY_LOWEST; priority >= BSP_MODULE_PRIORITY_HIGHEST; priority--) {
+        bsp_module_t* current = bsp_module_manager.module_list;
+        while (current != NULL) {
+            if (current->config.priority == priority) {
+                status = bsp_module_deinit(current->config.type, current->config.instance);
+                if (status != HAL_OK) {
+                    return status;
+                }
+            }
+            current = current->next;
+        }
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Start all registered BSP modules in priority order
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_start_all(void) {
+    hal_status_t status = HAL_OK;
+    
+    /* Start modules by priority */
+    for (uint8_t priority = BSP_MODULE_PRIORITY_HIGHEST; priority <= BSP_MODULE_PRIORITY_LOWEST; priority++) {
+        bsp_module_t* current = bsp_module_manager.module_list;
+        while (current != NULL) {
+            if (current->config.priority == priority && current->state >= BSP_MODULE_STATE_CONFIGURED) {
+                status = bsp_module_start(current->config.type, current->config.instance);
+                if (status != HAL_OK) {
+                    return status;
+                }
+            }
+            current = current->next;
+        }
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Stop all registered BSP modules in reverse priority order
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_stop_all(void) {
+    hal_status_t status = HAL_OK;
+    
+    /* Stop modules by reverse priority */
+    for (int8_t priority = BSP_MODULE_PRIORITY_LOWEST; priority >= BSP_MODULE_PRIORITY_HIGHEST; priority--) {
+        bsp_module_t* current = bsp_module_manager.module_list;
+        while (current != NULL) {
+            if (current->config.priority == priority && current->state == BSP_MODULE_STATE_RUNNING) {
+                status = bsp_module_stop(current->config.type, current->config.instance);
+                if (status != HAL_OK) {
+                    return status;
+                }
+            }
+            current = current->next;
+        }
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Get total number of registered modules
+ * @retval Number of registered modules
+ */
+uint32_t bsp_module_get_count(void) {
+    return bsp_module_manager.module_count;
+}
+
+/**
+ * @brief Get module manager instance
+ * @retval Pointer to module manager structure
+ */
+bsp_module_manager_t* bsp_module_get_manager(void) {
+    return &bsp_module_manager;
+}
+
+/**
+ * @brief Register a module event callback
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param callback: Event callback function
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_register_event_callback(bsp_module_type_t type, uint8_t instance, bsp_module_event_callback_t callback) {
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    module->event_callback = callback;
+    return HAL_OK;
+}
+
+/**
+ * @brief Trigger a module event
+ * @param module: Pointer to module structure
+ * @param event: Event to trigger
+ * @param data: Event data
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_trigger_event(const bsp_module_t* module, uint32_t event, void* data) {
+    if (module == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    // Check if module has an event callback registered
+    if (module->event_callback != NULL) {
+        return module->event_callback(module, event, data);
+    }
+    
+    return HAL_OK;
+}
+
+/**
+ * @brief Find modules by priority range
+ * @param min_priority: Minimum priority
+ * @param max_priority: Maximum priority
+ * @param count: Pointer to store number of modules found
+ * @retval Pointer to array of module pointers, or NULL if no modules found
+ */
+bsp_module_t** bsp_module_find_by_priority_range(bsp_module_priority_t min_priority, bsp_module_priority_t max_priority, uint32_t* count) {
+    if (count == NULL) {
+        return NULL;
+    }
+    
+    // First pass: count matching modules
+    uint32_t module_count = 0;
+    bsp_module_t* current = bsp_module_manager.module_list;
+    while (current != NULL) {
+        if (current->config.priority >= min_priority && current->config.priority <= max_priority) {
+            module_count++;
+        }
+        current = current->next;
+    }
+    
+    if (module_count == 0) {
+        *count = 0;
+        return NULL;
+    }
+    
+    // Second pass: allocate and fill array
+    bsp_module_t** modules = (bsp_module_t**)malloc(module_count * sizeof(bsp_module_t*));
+    if (modules == NULL) {
+        *count = 0;
+        return NULL;
+    }
+    
+    uint32_t index = 0;
+    current = bsp_module_manager.module_list;
+    while (current != NULL && index < module_count) {
+        if (current->config.priority >= min_priority && current->config.priority <= max_priority) {
+            modules[index++] = current;
+        }
+        current = current->next;
+    }
+    
+    *count = module_count;
+    return modules;
+}
+
+/**
+ * @brief Set module enable/disable state
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param enable: Enable flag
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_set_enable(bsp_module_type_t type, uint8_t instance, uint8_t enable) {
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    module->config.enable = enable;
+    return HAL_OK;
+}
+
+/**
+ * @brief Check if module is enabled
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param enable: Pointer to store enable state
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_is_enabled(bsp_module_type_t type, uint8_t instance, uint8_t* enable) {
+    if (enable == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        *enable = 0;
+        return HAL_ERROR;
+    }
+    
+    *enable = module->config.enable;
+    return HAL_OK;
+}
+
+/**
+ * @brief Set module priority
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param priority: New priority
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_set_priority(bsp_module_type_t type, uint8_t instance, bsp_module_priority_t priority) {
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        return HAL_ERROR;
+    }
+    
+    module->config.priority = priority;
+    return HAL_OK;
+}
+
+/**
+ * @brief Get module priority
+ * @param type: Module type
+ * @param instance: Module instance
+ * @param priority: Pointer to store priority
+ * @retval HAL status code
+ */
+hal_ret_t bsp_module_get_priority(bsp_module_type_t type, uint8_t instance, bsp_module_priority_t* priority) {
+    if (priority == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    bsp_module_t* module = bsp_module_get(type, instance);
+    if (module == NULL) {
+        *priority = BSP_MODULE_PRIORITY_MEDIUM;
+        return HAL_ERROR;
+    }
+    
+    *priority = module->config.priority;
+    return HAL_OK;
+}

BSP/Src/bsp_w25qxx.c

@@ -17,7 +17,7 @@
  * @return true if successful, false otherwise
  */
 static bool w25qxx_spi_send(const uint8_t *data, uint16_t size) {
-    return hal_spi_transmit(W25QXX_SPI_INSTANCE, data, size);
+    return hal_spi_transmit(W25QXX_SPI_INSTANCE, data, size) == HAL_RET_OK;
 }
 
 /**
@@ -27,7 +27,7 @@ static bool w25qxx_spi_send(const uint8_t *data, uint16_t size) {
  * @return true if successful, false otherwise
  */
 static bool w25qxx_spi_receive(uint8_t *data, uint16_t size) {
-    return hal_spi_receive(W25QXX_SPI_INSTANCE, data, size);
+    return hal_spi_receive(W25QXX_SPI_INSTANCE, data, size) == HAL_RET_OK;
 }
 
 /**
@@ -38,7 +38,7 @@ static bool w25qxx_spi_receive(uint8_t *data, uint16_t size) {
  * @return true if successful, false otherwise
  */
 static bool w25qxx_spi_transceive(const uint8_t *tx_data, uint8_t *rx_data, uint16_t size) {
-    return hal_spi_transmit_receive(W25QXX_SPI_INSTANCE, tx_data, rx_data, size);
+    return hal_spi_transmit_receive(W25QXX_SPI_INSTANCE, tx_data, rx_data, size) == HAL_RET_OK;
 }
 
 /**
@@ -96,7 +96,7 @@ bool bsp_w25qxx_init(void) {
         .databits = HAL_SPI_DATABITS_8
     };
     
-    if (!hal_spi_init(W25QXX_SPI_INSTANCE, &spi_config)) {
+    if (hal_spi_init(W25QXX_SPI_INSTANCE, &spi_config) != HAL_RET_OK) {
         return false;
     }
     

BSP/Src/stm32f407vet6_board.c

@@ -16,8 +16,9 @@
 /**
  * @brief Default LED initialization function
  * @param config: LED configuration structure
+ * @retval HAL status code
  */
-static void default_led_init(const void* config) {
+static hal_ret_t default_led_init(const void* config) {
     const bsp_led_config_t* led_config = (const bsp_led_config_t*)config;
     hal_gpio_config_t gpio_config = {
         .port = led_config->port,
@@ -26,7 +27,132 @@ static void default_led_init(const void* config) {
         .speed = led_config->speed,
         .pull = led_config->pull
     };
-    hal_gpio_configure_pin(&gpio_config);
+    return hal_gpio_configure_pin(&gpio_config);
+}
+
+/**
+ * @brief Default button initialization function
+ * @param config: Button configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_button_init(const void* config) {
+    const bsp_buttons_config_t* buttons_config = (const bsp_buttons_config_t*)config;
+    uint8_t i;
+    hal_ret_t status = HAL_RET_OK;
+    
+    for (i = 0; i < buttons_config->count; i++) {
+        const bsp_button_config_t* button_config = &buttons_config->buttons[i];
+        hal_gpio_config_t gpio_config = {
+            .port = button_config->port,
+            .pin = button_config->pin,
+            .mode = button_config->mode,
+            .speed = button_config->speed,
+            .pull = button_config->pull
+        };
+        status = hal_gpio_configure_pin(&gpio_config);
+        if (status != HAL_RET_OK) {
+            break;
+        }
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Default UART initialization function
+ * @param config: UART configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_uart_init(const void* config) {
+    const bsp_uart_config_t* uart_config = (const bsp_uart_config_t*)config;
+    hal_uart_config_t uart_cfg = {
+        .instance = (hal_uart_instance_t)uart_config->instance,
+        .baudrate = uart_config->baudrate,
+        .parity = uart_config->parity,
+        .stopbits = uart_config->stopbits,
+        .databits = uart_config->databits
+    };
+    return hal_uart_config(&uart_cfg);
+}
+
+/**
+ * @brief Default SPI initialization function
+ * @param config: SPI configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_spi_init(const void* config) {
+    const bsp_spi_config_t* spi_config = (const bsp_spi_config_t*)config;
+    hal_spi_config_t spi_cfg = {
+        .instance = spi_config->instance,
+        .mode = spi_config->mode,
+        .baudrate = spi_config->baudrate,
+        .polarity = spi_config->polarity,
+        .phase = spi_config->phase,
+        .databits = spi_config->databits
+    };
+    return hal_spi_init(spi_config->instance, &spi_cfg);
+}
+
+/**
+ * @brief Default I2C initialization function
+ * @param config: I2C configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_i2c_init(const void* config) {
+    /* TODO: Implement default I2C initialization */
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Default CAN initialization function
+ * @param config: CAN configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_can_init(const void* config) {
+    /* TODO: Implement default CAN initialization */
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Default ADC initialization function
+ * @param config: ADC configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_adc_init(const void* config) {
+    /* TODO: Implement default ADC initialization */
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Default W25QXX initialization function
+ * @param config: W25QXX configuration structure
+ * @retval HAL status code
+ */
+static hal_ret_t default_w25qxx_init(const void* config) {
+    const bsp_w25qxx_config_t* w25qxx_config = (const bsp_w25qxx_config_t*)config;
+    hal_ret_t status = HAL_RET_OK;
+    
+    /* Initialize CS pin */
+    hal_gpio_config_t gpio_config = {
+        .port = w25qxx_config->cs_port,
+        .pin = w25qxx_config->cs_pin,
+        .mode = HAL_GPIO_MODE_OUTPUT_PP,
+        .speed = HAL_GPIO_SPEED_HIGH,
+        .pull = HAL_GPIO_PULL_NO
+    };
+    status = hal_gpio_configure_pin(&gpio_config);
+    if (status != HAL_RET_OK) {
+        return status;
+    }
+    
+    /* Deselect chip initially */
+    status = hal_gpio_write_pin(w25qxx_config->cs_port, w25qxx_config->cs_pin, HAL_GPIO_PIN_SET);
+    if (status != HAL_RET_OK) {
+        return status;
+    }
+    
+    /* SPI instance is now just an index, actual SPI initialization is handled separately */
+    return status;
 }
 
 /**
@@ -35,8 +161,8 @@ static void default_led_init(const void* config) {
 static const bsp_button_config_t stm32f407vet6_buttons[] = {
     /* KEY0 - PE4, active low */
     {
-        .port = BSP_KEY0_PORT,
-        .pin = BSP_KEY0_PIN,
+        .port = HAL_GPIO_PORT_E,
+        .pin = HAL_GPIO_PIN_4,
         .mode = HAL_GPIO_MODE_INPUT,
         .speed = HAL_GPIO_SPEED_LOW,
         .pull = HAL_GPIO_PULL_UP,
@@ -44,8 +170,8 @@ static const bsp_button_config_t stm32f407vet6_buttons[] = {
     },
     /* KEY1 - PE3, active low */
     {
-        .port = BSP_KEY1_PORT,
-        .pin = BSP_KEY1_PIN,
+        .port = HAL_GPIO_PORT_E,
+        .pin = HAL_GPIO_PIN_3,
         .mode = HAL_GPIO_MODE_INPUT,
         .speed = HAL_GPIO_SPEED_LOW,
         .pull = HAL_GPIO_PULL_UP,
@@ -53,8 +179,8 @@ static const bsp_button_config_t stm32f407vet6_buttons[] = {
     },
     /* WKUP - PA0, active high */
     {
-        .port = BSP_WKUP_PORT,
-        .pin = BSP_WKUP_PIN,
+        .port = HAL_GPIO_PORT_A,
+        .pin = HAL_GPIO_PIN_0,
         .mode = HAL_GPIO_MODE_INPUT,
         .speed = HAL_GPIO_SPEED_LOW,
         .pull = HAL_GPIO_PULL_DOWN,
@@ -66,121 +192,217 @@ static const bsp_button_config_t stm32f407vet6_buttons[] = {
  * @brief STM32F407VET6 buttons configuration
  */
 static const bsp_buttons_config_t stm32f407vet6_buttons_config = {
+    .enable = 1,
     .count = sizeof(stm32f407vet6_buttons) / sizeof(bsp_button_config_t),
     .buttons = stm32f407vet6_buttons
 };
 
 /**
- * @brief Default button initialization function
- * @param config: Button configuration structure
+ * @brief STM32F407VET6 board UART configurations
  */
-static void default_button_init(const void* config) {
-    const bsp_buttons_config_t* buttons_config = (const bsp_buttons_config_t*)config;
-    uint8_t i;
-    
-    for (i = 0; i < buttons_config->count; i++) {
-        const bsp_button_config_t* button_config = &buttons_config->buttons[i];
-        hal_gpio_config_t gpio_config = {
-            .port = button_config->port,
-            .pin = button_config->pin,
-            .mode = button_config->mode,
-            .speed = button_config->speed,
-            .pull = button_config->pull
-        };
-        hal_gpio_configure_pin(&gpio_config);
-    }
-}
-
-/**
- * @brief Default UART initialization function
- * @param config: UART configuration structure
- */
-static void default_uart_init(const void* config) {
-    const bsp_uart_config_t* uart_config = (const bsp_uart_config_t*)config;
-    hal_uart_config_t uart_cfg = {
-        .instance = (hal_uart_instance_t)uart_config->instance,
-        .baudrate = uart_config->baudrate,
-        .parity = uart_config->parity,
-        .stopbits = uart_config->stopbits,
-        .databits = uart_config->databits
-    };
-    hal_uart_config(&uart_cfg);
-}
-
-/**
- * @brief Default W25QXX initialization function
- * @param config: W25QXX configuration structure
- */
-static void default_w25qxx_init(const void* config) {
-    const bsp_w25qxx_config_t* w25qxx_config = (const bsp_w25qxx_config_t*)config;
-    
-    /* Initialize CS pin */
-    hal_gpio_config_t gpio_config = {
-        .port = w25qxx_config->cs_port,
-        .pin = w25qxx_config->cs_pin,
-        .mode = HAL_GPIO_MODE_OUTPUT_PP,
-        .speed = HAL_GPIO_SPEED_HIGH,
-        .pull = HAL_GPIO_PULL_NO
-    };
-    hal_gpio_configure_pin(&gpio_config);
-    
-    /* Deselect chip initially */
-    hal_gpio_write_pin(w25qxx_config->cs_port, w25qxx_config->cs_pin, HAL_GPIO_PIN_SET);
-    
-    /* Initialize SPI */
-    hal_spi_config_t spi_config = {
-        .instance = w25qxx_config->spi_config.instance,
-        .mode = w25qxx_config->spi_config.mode,
-        .baudrate = w25qxx_config->spi_config.baudrate,
-        .polarity = w25qxx_config->spi_config.polarity,
-        .phase = w25qxx_config->spi_config.phase,
-        .databits = w25qxx_config->spi_config.databits
-    };
-    hal_spi_init(w25qxx_config->spi_config.instance, &spi_config);
-}
-
-/**
- * @brief STM32F407VET6 board configuration
- */
-const bsp_board_config_t stm32f407vet6_board_config = {
-    .name = BOARD_NAME,
-    .led = {
-        .port = BSP_LED_PORT,
-        .pin = BSP_LED_PIN,
-        .mode = HAL_GPIO_MODE_OUTPUT_PP,
-        .speed = HAL_GPIO_SPEED_MEDIUM,
-        .pull = HAL_GPIO_PULL_NO
-    },
-    .buttons = stm32f407vet6_buttons_config,
-    .uart = {
-        .instance = BSP_UART_INSTANCE,
-        .baudrate = BSP_UART_BAUDRATE,
-        .parity = BSP_UART_PARITY,
-        .stopbits = BSP_UART_STOPBITS,
-        .databits = BSP_UART_DATABITS,
+static const bsp_uart_config_t stm32f407vet6_uarts[] = {
+    /* USART1 - PA9(TX), PA10(RX) */
+    {
+        .enable = 1,
+        .instance = BSP_UART_INSTANCE_1,
+        .baudrate = 115200,
+        .parity = HAL_UART_PARITY_NONE,
+        .stopbits = HAL_UART_STOPBITS_1,
+        .databits = HAL_UART_DATABITS_8,
         .tx_port = HAL_GPIO_PORT_A,  /* USART1_TX - PA9 */
         .tx_pin = HAL_GPIO_PIN_9,
         .rx_port = HAL_GPIO_PORT_A,  /* USART1_RX - PA10 */
         .rx_pin = HAL_GPIO_PIN_10
-    },
-    .w25qxx = {
-        .cs_port = HAL_GPIO_PORT_B,
-        .cs_pin = HAL_GPIO_PIN_0,
-        .spi_config = {
+    }
+};
+
+/**
+ * @brief STM32F407VET6 board SPI configurations
+ */
+static const bsp_spi_config_t stm32f407vet6_spis[] = {
+    /* SPI1 - PA5(SCK), PA6(MISO), PA7(MOSI) */
+    {
+        .enable = 1,
         .instance = HAL_SPI_INSTANCE_1,
         .mode = HAL_SPI_MODE_MASTER,
         .baudrate = 1000000, /* 1 MHz */
         .polarity = HAL_SPI_POLARITY_LOW,
         .phase = HAL_SPI_PHASE_1EDGE,
-            .databits = HAL_SPI_DATABITS_8
+        .databits = HAL_SPI_DATABITS_8,
+        .sck_port = HAL_GPIO_PORT_A,
+        .sck_pin = HAL_GPIO_PIN_5,
+        .miso_port = HAL_GPIO_PORT_A,
+        .miso_pin = HAL_GPIO_PIN_6,
+        .mosi_port = HAL_GPIO_PORT_A,
+        .mosi_pin = HAL_GPIO_PIN_7
     }
+};
+
+/**
+ * @brief STM32F407VET6 board I2C configurations
+ */
+static const bsp_i2c_config_t stm32f407vet6_i2cs[] = {
+    /* I2C1 - PB6(SCL), PB7(SDA) */
+    {
+        .enable = 0, /* Disabled by default */
+        .instance = HAL_I2C_INSTANCE_1,
+        .speed = HAL_I2C_SPEED_STANDARD,
+        .address_mode = HAL_I2C_ADDRESS_7BIT,
+        .dutycycle = HAL_I2C_DUTYCYCLE_2,
+        .own_address1 = 0x00,
+        .scl_port = HAL_GPIO_PORT_B,
+        .scl_pin = HAL_GPIO_PIN_6,
+        .sda_port = HAL_GPIO_PORT_B,
+        .sda_pin = HAL_GPIO_PIN_7
+    }
+};
+
+/**
+ * @brief STM32F407VET6 board CAN configurations
+ */
+static const bsp_can_config_t stm32f407vet6_cans[] = {
+    /* CAN1 - PA11(RX), PA12(TX) */
+    {
+        .enable = 0, /* Disabled by default */
+        .instance = HAL_CAN_INSTANCE_1,
+        .mode = HAL_CAN_MODE_NORMAL,
+        .prescaler = 6, /* 168MHz / 6 = 28MHz */
+        .sync_jump_width = 1,
+        .time_segment1 = 13,
+        .time_segment2 = 2,
+        .rx_port = HAL_GPIO_PORT_A,
+        .rx_pin = HAL_GPIO_PIN_11,
+        .tx_port = HAL_GPIO_PORT_A,
+        .tx_pin = HAL_GPIO_PIN_12
+    }
+};
+
+/**
+ * @brief STM32F407VET6 board ADC channel configurations
+ */
+static const bsp_adc_channel_config_t stm32f407vet6_adc_channels[] = {
+    /* ADC1 Channel 0 - PA0 */
+    {
+        .enable = 0, /* Disabled by default */
+        .channel = HAL_ADC_CHANNEL_0,
+        .sampletime = HAL_ADC_SAMPLETIME_56CYCLES,
+        .rank = 1
+    }
+};
+
+/**
+ * @brief STM32F407VET6 board ADC configurations
+ */
+static const bsp_adc_config_t stm32f407vet6_adcs[] = {
+    /* ADC1 */
+    {
+        .enable = 0, /* Disabled by default */
+        .instance = HAL_ADC_INSTANCE_1,
+        .resolution = HAL_ADC_RESOLUTION_12B,
+        .scan_conversion_mode = 0,
+        .continuous_conversion_mode = 0,
+        .channel_count = sizeof(stm32f407vet6_adc_channels) / sizeof(bsp_adc_channel_config_t),
+        .channels = stm32f407vet6_adc_channels
+    }
+};
+
+/**
+ * @brief STM32F407VET6 board configuration
+ */
+const bsp_board_config_t stm32f407vet6_board_config = {
+    .version = BSP_CONFIG_VERSION,
+    .name = "STM32F407VET6",
+    .description = "STM32F407VET6 Development Board",
+    .id = {
+        .vendor_id = 0x0483,      /* STMicroelectronics */
+        .product_id = 0x374B,      /* STM32F4 Series */
+        .serial_number = 0x00000001 /* Default serial number */
     },
+    
+    /* Board features */
+    .features = (
+        BSP_BOARD_FEATURE_LED | 
+        BSP_BOARD_FEATURE_BUTTON | 
+        BSP_BOARD_FEATURE_UART | 
+        BSP_BOARD_FEATURE_SPI | 
+        BSP_BOARD_FEATURE_I2C | 
+        BSP_BOARD_FEATURE_CAN | 
+        BSP_BOARD_FEATURE_ADC | 
+        BSP_BOARD_FEATURE_W25QXX
+    ),
+    
+    /* Hardware information */
+    .hw_info = {
+        .clock_speed = 168000000,  /* 168 MHz */
+        .flash_size = 512 * 1024,  /* 512 KB */
+        .ram_size = 192 * 1024,     /* 192 KB */
+        .eeprom_size = 0,           /* No internal EEPROM */
+        .sram_size = 64 * 1024,     /* 64 KB SRAM */
+        .cpu_core = 0x0F,           /* Cortex-M4 */
+        .cpu_bits = 32              /* 32-bit CPU */
+    },
+    
+    /* Peripheral configurations */
+    .led = {
+        .enable = 1,
+        .port = HAL_GPIO_PORT_E,
+        .pin = HAL_GPIO_PIN_5,
+        .mode = HAL_GPIO_MODE_OUTPUT_PP,
+        .speed = HAL_GPIO_SPEED_MEDIUM,
+        .pull = HAL_GPIO_PULL_NO
+    },
+    .buttons = stm32f407vet6_buttons_config,
+    .w25qxx = {
+        .enable = 1,
+        .cs_port = HAL_GPIO_PORT_B,
+        .cs_pin = HAL_GPIO_PIN_0,
+        .spi_instance = 0  /* Use SPI instance 0 */
+    },
+    
+    /* Peripheral arrays */
+    .periphs = {
+        /* UART configurations */
+        .uart_count = 1,
+        .uarts = stm32f407vet6_uarts,
+        
+        /* SPI configurations */
+        .spi_count = 1,
+        .spis = stm32f407vet6_spis,
+        
+        /* I2C configurations */
+        .i2c_count = 1,
+        .i2cs = stm32f407vet6_i2cs,
+        
+        /* CAN configurations */
+        .can_count = 1,
+        .cans = stm32f407vet6_cans,
+        
+        /* ADC configurations */
+        .adc_count = 1,
+        .adcs = stm32f407vet6_adcs
+    },
+    
+    /* Initialization function pointers */
+    .init_funcs = {
         .led_init = default_led_init,
         .button_init = default_button_init,
         .uart_init = default_uart_init,
-    .w25qxx_init = default_w25qxx_init,
-    .clock_speed = 168000000,  /* 168 MHz */
-    .uart_count = 6
+        .spi_init = default_spi_init,
+        .i2c_init = default_i2c_init,
+        .can_init = default_can_init,
+        .adc_init = default_adc_init,
+        .w25qxx_init = default_w25qxx_init
+    },
+    
+    /* Additional board-specific configuration */
+    .custom_config = NULL,
+    .custom_config_size = 0,
+    
+    /* Board revision information */
+    .major_rev = 1,
+    .minor_rev = 0,
+    .patch_rev = 0,
+    .revision_desc = "Original release"
 };
 
 /**
@@ -190,3 +412,11 @@ const bsp_board_config_t stm32f407vet6_board_config = {
 const char* bsp_board_get_name(void) {
     return stm32f407vet6_board_config.name;
 }
+
+/**
+ * @brief Get board configuration
+ * @retval Pointer to board configuration structure
+ */
+const bsp_board_config_t* bsp_board_get_config(void) {
+    return &stm32f407vet6_board_config;
+}

Core/Src/main.c

@@ -49,12 +49,6 @@
 /* Private variables ---------------------------------------------------------*/
 
 /* USER CODE BEGIN PV */
-/* LED configuration */
-static led_config_t led_config = {
-    .gpio_port = BSP_LED_PORT,
-    .gpio_pin = BSP_LED_PIN
-};
-
 /* LED instance */
 static led_t led;
 
@@ -105,10 +99,17 @@ int main(void)
   bsp_init();
   /* USER CODE BEGIN 2 */
   /* Initialize modules */
-  led_init(&led, &led_config);
   delay_init();
   logging_init();
   
+  /* Get LED configuration from board config */
+  const bsp_board_config_t* board_config = bsp_get_board_config();
+  led_config_t led_config = {
+      .gpio_port = board_config->led.port,
+      .gpio_pin = board_config->led.pin
+  };
+  led_init(&led, &led_config);
+  
   /* Initialize keys */
   bsp_key_init();
   

HAL/Inc/arch/stm32f4/hal_stm32f4.h

@@ -14,9 +14,9 @@
 #include "stm32f4xx_hal.h"
 
 /* Include common HAL headers */
+#include "../../hal_delay.h"
 #include "../../hal_gpio.h"
 #include "../../hal_uart.h"
-#include "../../hal_delay.h"
 
 /**
  * @brief STM32F4 specific initialization

HAL/Inc/hal.h

@@ -10,6 +10,14 @@
 #ifndef HAL_H
 #define HAL_H
 
+#include <stdint.h>
+
+/* HAL version definitions */
+#define HAL_VERSION_MAJOR 1
+#define HAL_VERSION_MINOR 0
+#define HAL_VERSION_PATCH 0
+#define HAL_VERSION_STRING "1.0.0"
+
 /* Define supported architectures */
 #define HAL_ARCH_STM32F1 0
 #define HAL_ARCH_STM32F4 1
@@ -21,27 +29,339 @@
 #define HAL_TARGET_ARCH HAL_ARCH_STM32F4
 #endif
 
-/* Include architecture specific headers */
-#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-#include "arch/stm32f1/hal_stm32f1.h"
-#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-#include "arch/stm32f4/hal_stm32f4.h"
-#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-#include "arch/stm32f7/hal_stm32f7.h"
-#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-#include "arch/stm32l4/hal_stm32l4.h"
-#else
-#error "Unsupported HAL architecture: " #HAL_TARGET_ARCH
-#endif
+/* Architecture specific functions will be included in implementation files */
 
 /* Architecture compatibility check */
 #if HAL_TARGET_ARCH < HAL_ARCH_STM32F1 || HAL_TARGET_ARCH > HAL_ARCH_STM32L4
 #error "Invalid HAL architecture selection"
 #endif
 
+/**
+ * @brief HAL status return codes - renamed to avoid conflict with STM32 HAL
+ */
+typedef enum {
+    HAL_RET_OK                 = 0x00U,    /*!< Operation completed successfully */
+    HAL_RET_ERROR              = 0x01U,    /*!< Generic operation failed */
+    HAL_RET_BUSY               = 0x02U,    /*!< Peripheral or resource busy */
+    HAL_RET_TIMEOUT            = 0x03U,    /*!< Operation timed out */
+    HAL_RET_INVALID_PARAM      = 0x04U,    /*!< Invalid parameter */
+    HAL_RET_NOT_SUPPORTED      = 0x05U,    /*!< Operation not supported */
+    HAL_RET_OUT_OF_MEMORY      = 0x06U,    /*!< Out of memory */
+    HAL_RET_INTERNAL_ERROR     = 0x07U,    /*!< Internal error */
+    HAL_RET_RESOURCE_LOCKED    = 0x08U,    /*!< Resource locked */
+    HAL_RET_RESOURCE_ERROR     = 0x09U,    /*!< Resource error */
+    HAL_RET_COMM_ERROR         = 0x0AU,    /*!< Communication error */
+    HAL_RET_CONFIG_ERROR       = 0x0BU,    /*!< Configuration error */
+    HAL_RET_INIT_ERROR         = 0x0CU,    /*!< Initialization error */
+    HAL_RET_DEINIT_ERROR       = 0x0DU,    /*!< Deinitialization error */
+    HAL_RET_IO_ERROR           = 0x0EU,    /*!< I/O operation error */
+    HAL_RET_OVERRUN_ERROR      = 0x0FU,    /*!< Overrun error */
+    HAL_RET_UNDERRUN_ERROR     = 0x10U,    /*!< Underrun error */
+    HAL_RET_PARITY_ERROR       = 0x11U,    /*!< Parity error */
+    HAL_RET_FRAMING_ERROR      = 0x12U,    /*!< Framing error */
+    HAL_RET_NOISE_ERROR        = 0x13U     /*!< Noise error */
+} hal_ret_t;
+
+/**
+ * @brief HAL error category definitions
+ */
+typedef enum {
+    HAL_ERR_CAT_COMMON      = 0x00U,    /*!< Common error category */
+    HAL_ERR_CAT_GPIO        = 0x10U,    /*!< GPIO error category */
+    HAL_ERR_CAT_UART        = 0x20U,    /*!< UART error category */
+    HAL_ERR_CAT_SPI         = 0x30U,    /*!< SPI error category */
+    HAL_ERR_CAT_I2C         = 0x40U,    /*!< I2C error category */
+    HAL_ERR_CAT_CAN         = 0x50U,    /*!< CAN error category */
+    HAL_ERR_CAT_ADC         = 0x60U,    /*!< ADC error category */
+    HAL_ERR_CAT_DMA         = 0x70U,    /*!< DMA error category */
+    HAL_ERR_CAT_RTC         = 0x80U,    /*!< RTC error category */
+    HAL_ERR_CAT_MODULE      = 0x90U,    /*!< Module management error category */
+    HAL_ERR_CAT_ARCH        = 0xA0U,    /*!< Architecture specific error category */
+    HAL_ERR_CAT_MAX         = 0xFFU     /*!< Maximum error category */
+} hal_error_category_t;
+
+/**
+ * @brief HAL extended error code structure
+ */
+typedef struct {
+    hal_ret_t status;               /*!< HAL status code */
+    hal_error_category_t category;     /*!< Error category */
+    uint32_t specific_error;           /*!< Specific error code (category dependent) */
+    const char* file;                  /*!< File where error occurred */
+    uint32_t line;                     /*!< Line number where error occurred */
+    const char* function;              /*!< Function where error occurred */
+    uint32_t timestamp;                /*!< Error timestamp */
+} hal_error_t;
+
+/**
+ * @brief HAL error callback type
+ */
+typedef void (*hal_error_callback_t)(const hal_error_t* error);
+
+/**
+ * @brief HAL error information context
+ */
+typedef struct {
+    hal_error_callback_t callback;     /*!< Error callback function */
+    hal_error_t last_error;            /*!< Last error information */
+    uint32_t error_count;              /*!< Total error count */
+    uint8_t enabled;                   /*!< Error logging enabled flag */
+} hal_error_context_t;
+
+/**
+ * @brief HAL module types
+ */
+typedef enum {
+    HAL_MODULE_GPIO = 0,
+    HAL_MODULE_UART,
+    HAL_MODULE_SPI,
+    HAL_MODULE_I2C,
+    HAL_MODULE_CAN,
+    HAL_MODULE_ADC,
+    HAL_MODULE_DAC,
+    HAL_MODULE_TIMER,
+    HAL_MODULE_RTC,
+    HAL_MODULE_DMA,
+    HAL_MODULE_MAX
+} hal_module_type_t;
+
+/**
+ * @brief HAL handle structure - base for all HAL peripherals
+ */
+typedef struct {
+    void* instance;
+    void* config;
+    hal_ret_t status;
+    uint32_t lock;
+    void* user_data;
+} hal_handle_t;
+
+/**
+ * @brief HAL module operations structure - unified API for all modules
+ */
+typedef struct {
+    hal_ret_t (*init)(hal_handle_t* handle);
+    hal_ret_t (*deinit)(hal_handle_t* handle);
+    hal_ret_t (*configure)(hal_handle_t* handle, void* config);
+    hal_ret_t (*control)(hal_handle_t* handle, uint32_t cmd, void* param);
+    hal_ret_t (*get_status)(hal_handle_t* handle, uint32_t* status);
+} hal_module_ops_t;
+
+/**
+ * @brief HAL module configuration structure
+ */
+typedef struct {
+    hal_module_type_t type;
+    const char* name;
+    uint32_t version;
+    hal_module_ops_t ops;
+    void* default_config;
+} hal_module_config_t;
+
+/**
+ * @brief HAL initialization structure
+ */
+typedef struct {
+    uint32_t module_count;
+    const hal_module_config_t* modules;
+    uint32_t flags;
+} hal_init_t;
+
+/**
+ * @brief HAL flags definitions
+ */
+#define HAL_INIT_FLAG_DEBUG       (1 << 0)  /*!< Enable debug mode */
+#define HAL_INIT_FLAG_NO_CACHE    (1 << 1)  /*!< Disable cache */
+#define HAL_INIT_FLAG_SAFE_MODE   (1 << 2)  /*!< Enable safe mode */
+
+/**
+ * @brief HAL peripheral state definitions
+ */
+typedef enum {
+    HAL_PERIPH_STATE_RESET = 0,
+    HAL_PERIPH_STATE_READY,
+    HAL_PERIPH_STATE_BUSY,
+    HAL_PERIPH_STATE_TIMEOUT,
+    HAL_PERIPH_STATE_ERROR
+} hal_periph_state_t;
+
+/**
+ * @brief HAL lock/unlock macros
+ */
+#define HAL_LOCK(handle)   do { while((handle)->lock); (handle)->lock = 1; } while(0)
+#define HAL_UNLOCK(handle) do { (handle)->lock = 0; } while(0)
+
+/**
+ * @brief HAL handle initialization macro
+ */
+#define HAL_HANDLE_INIT(handle) \
+    do { \
+        memset((handle), 0, sizeof(hal_handle_t)); \
+        (handle)->status = HAL_RET_OK; \
+        (handle)->lock = 0; \
+    } while(0)
+
+/**
+ * @brief HAL module registration macro
+ */
+#define HAL_MODULE_REGISTER(module) \
+    static const hal_module_config_t __hal_module_##module##_config = { \
+        .type = HAL_MODULE_##module, \
+        .name = #module, \
+        .version = 1, \
+        .ops = __hal_##module##_ops, \
+        .default_config = &__hal_##module##_default_config \
+    };
+
+/**
+ * @brief HAL module registration at startup
+ */
+#define HAL_MODULE_REGISTER_STARTUP(module) \
+    HAL_MODULE_REGISTER(module) \
+    __attribute__((constructor)) static void __hal_register_##module##_at_startup(void) { \
+        hal_module_register(&__hal_module_##module##_config); \
+    }
+
 /**
  * @brief HAL module initialization
  */
-void hal_init(void);
+hal_ret_t hal_init(void);
+
+/**
+ * @brief Register a HAL module
+ * @param module_config: Module configuration
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_register(const hal_module_config_t* module_config);
+
+/**
+ * @brief Initialize a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_init(hal_module_type_t module_type, hal_handle_t* handle);
+
+/**
+ * @brief Deinitialize a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_deinit(hal_module_type_t module_type, hal_handle_t* handle);
+
+/**
+ * @brief Configure a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param config: Module configuration data
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_configure(hal_module_type_t module_type, hal_handle_t* handle, void* config);
+
+/**
+ * @brief Control a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param cmd: Control command
+ * @param param: Control parameter
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_control(hal_module_type_t module_type, hal_handle_t* handle, uint32_t cmd, void* param);
+
+/**
+ * @brief Get status of a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param status: Pointer to store module status
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_get_status(hal_module_type_t module_type, hal_handle_t* handle, uint32_t* status);
+
+/**
+ * @brief Get default configuration for a module
+ * @param module_type: Module type
+ * @return Pointer to default configuration, or NULL if not available
+ */
+void* hal_module_get_default_config(hal_module_type_t module_type);
+
+/**
+ * @brief Get HAL version information
+ * @param major: Pointer to store major version
+ * @param minor: Pointer to store minor version
+ * @param patch: Pointer to store patch version
+ * @retval HAL status code
+ */
+hal_ret_t hal_get_version(uint8_t* major, uint8_t* minor, uint8_t* patch);
+
+/**
+ * @brief Get HAL version string
+ * @retval Version string
+ */
+const char* hal_get_version_string(void);
+
+/**
+ * @brief Get HAL module count
+ * @retval Number of registered HAL modules
+ */
+uint32_t hal_get_module_count(void);
+
+/**
+ * @brief Get HAL module configuration
+ * @param module_type: Module type
+ * @retval Pointer to module configuration, or NULL if not found
+ */
+const hal_module_config_t* hal_get_module_config(hal_module_type_t module_type);
+
+/**
+ * @brief Initialize HAL error handling system
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_init(void);
+
+/**
+ * @brief Deinitialize HAL error handling system
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_deinit(void);
+
+/**
+ * @brief Register an error callback function
+ * @param callback: Error callback function
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_register_callback(hal_error_callback_t callback);
+
+/**
+ * @brief Record an error
+ * @param error: Pointer to error information
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_record(const hal_error_t* error);
+
+/**
+ * @brief Get last error information
+ * @retval Pointer to last error information
+ */
+const hal_error_t* hal_error_get_last(void);
+
+/**
+ * @brief Get total error count
+ * @retval Total error count
+ */
+uint32_t hal_error_get_count(void);
+
+/**
+ * @brief Clear error information
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_clear(void);
+
+/**
+ * @brief Enable/disable error logging
+ * @param enable: Enable flag (1 to enable, 0 to disable)
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_enable(uint8_t enable);
 
 #endif /* HAL_H */

HAL/Inc/hal_adc.h

@@ -0,0 +1,175 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_adc.h
+  * @brief          : ADC hardware abstraction layer header file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#ifndef HAL_ADC_H
+#define HAL_ADC_H
+
+#include <stdint.h>
+#include <stddef.h>
+#include "hal.h"
+
+/**
+ * @brief ADC instance identifier definitions
+ */
+typedef enum {
+    HAL_ADC_INSTANCE_1 = 0,
+    HAL_ADC_INSTANCE_2,
+    HAL_ADC_INSTANCE_3,
+    HAL_ADC_INSTANCE_MAX
+} hal_adc_instance_t;
+
+/**
+ * @brief ADC resolution definitions
+ */
+typedef enum {
+    HAL_ADC_RESOLUTION_12B = 0,
+    HAL_ADC_RESOLUTION_10B,
+    HAL_ADC_RESOLUTION_8B,
+    HAL_ADC_RESOLUTION_6B
+} hal_adc_resolution_t;
+
+/**
+ * @brief ADC channel definitions
+ */
+typedef enum {
+    HAL_ADC_CHANNEL_0 = 0,
+    HAL_ADC_CHANNEL_1,
+    HAL_ADC_CHANNEL_2,
+    HAL_ADC_CHANNEL_3,
+    HAL_ADC_CHANNEL_4,
+    HAL_ADC_CHANNEL_5,
+    HAL_ADC_CHANNEL_6,
+    HAL_ADC_CHANNEL_7,
+    HAL_ADC_CHANNEL_8,
+    HAL_ADC_CHANNEL_9,
+    HAL_ADC_CHANNEL_10,
+    HAL_ADC_CHANNEL_11,
+    HAL_ADC_CHANNEL_12,
+    HAL_ADC_CHANNEL_13,
+    HAL_ADC_CHANNEL_14,
+    HAL_ADC_CHANNEL_15,
+    HAL_ADC_CHANNEL_16,
+    HAL_ADC_CHANNEL_17,
+    HAL_ADC_CHANNEL_18,
+    HAL_ADC_CHANNEL_MAX
+} hal_adc_channel_t;
+
+/**
+ * @brief ADC sample time definitions
+ */
+typedef enum {
+    HAL_ADC_SAMPLETIME_3CYCLES = 0,
+    HAL_ADC_SAMPLETIME_15CYCLES,
+    HAL_ADC_SAMPLETIME_28CYCLES,
+    HAL_ADC_SAMPLETIME_56CYCLES,
+    HAL_ADC_SAMPLETIME_84CYCLES,
+    HAL_ADC_SAMPLETIME_112CYCLES,
+    HAL_ADC_SAMPLETIME_144CYCLES,
+    HAL_ADC_SAMPLETIME_480CYCLES
+} hal_adc_sampletime_t;
+
+/**
+ * @brief ADC channel configuration structure
+ */
+typedef struct {
+    hal_adc_channel_t channel;
+    hal_adc_sampletime_t sampletime;
+    uint8_t rank;
+    uint8_t enable;
+} hal_adc_channel_config_t;
+
+/**
+ * @brief ADC configuration structure
+ */
+typedef struct {
+    hal_adc_instance_t instance;
+    hal_adc_resolution_t resolution;
+    uint8_t scan_conversion_mode;
+    uint8_t continuous_conversion_mode;
+    uint8_t discontinuous_conversion_mode;
+    uint8_t discontinuous_number_of_conversions;
+    uint8_t nbr_of_conversions;
+    uint8_t channel_count;
+    const hal_adc_channel_config_t* channels;
+    uint32_t timeout;
+} hal_adc_config_t;
+
+/**
+ * @brief Initialize ADC hardware
+ * @param config: ADC configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_init(const hal_adc_config_t *config);
+
+/**
+ * @brief Deinitialize ADC hardware
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_deinit(hal_adc_instance_t instance);
+
+/**
+ * @brief Start ADC conversion
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_start(hal_adc_instance_t instance);
+
+/**
+ * @brief Stop ADC conversion
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_stop(hal_adc_instance_t instance);
+
+/**
+ * @brief Get ADC conversion value
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @param value: Pointer to store conversion value
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_get_value(hal_adc_instance_t instance, hal_adc_channel_t channel, uint16_t *value, uint32_t timeout);
+
+/**
+ * @brief Get multiple ADC conversion values
+ * @param instance: ADC instance identifier
+ * @param values: Pointer to store conversion values
+ * @param length: Number of values to get
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_get_values(hal_adc_instance_t instance, uint16_t *values, uint8_t length, uint32_t timeout);
+
+/**
+ * @brief Configure ADC channel
+ * @param instance: ADC instance identifier
+ * @param config: ADC channel configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_configure_channel(hal_adc_instance_t instance, const hal_adc_channel_config_t *config);
+
+/**
+ * @brief Enable ADC channel
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_enable_channel(hal_adc_instance_t instance, hal_adc_channel_t channel);
+
+/**
+ * @brief Disable ADC channel
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_disable_channel(hal_adc_instance_t instance, hal_adc_channel_t channel);
+
+#endif /* HAL_ADC_H */

HAL/Inc/hal_can.h

@@ -0,0 +1,180 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_can.h
+  * @brief          : CAN hardware abstraction layer header file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#ifndef HAL_CAN_H
+#define HAL_CAN_H
+
+#include <stdint.h>
+#include <stddef.h>
+#include "hal.h"
+
+/**
+ * @brief CAN instance identifier definitions
+ */
+typedef enum {
+    HAL_CAN_INSTANCE_1 = 0,
+    HAL_CAN_INSTANCE_2,
+    HAL_CAN_INSTANCE_MAX
+} hal_can_instance_t;
+
+/**
+ * @brief CAN mode definitions
+ */
+typedef enum {
+    HAL_CAN_MODE_NORMAL = 0,
+    HAL_CAN_MODE_LOOPBACK,
+    HAL_CAN_MODE_SILENT,
+    HAL_CAN_MODE_SILENT_LOOPBACK
+} hal_can_mode_t;
+
+/**
+ * @brief CAN filter mode definitions
+ */
+typedef enum {
+    HAL_CAN_FILTER_MODE_IDMASK = 0,
+    HAL_CAN_FILTER_MODE_IDLIST
+} hal_can_filter_mode_t;
+
+/**
+ * @brief CAN filter scale definitions
+ */
+typedef enum {
+    HAL_CAN_FILTER_SCALE_16BIT = 0,
+    HAL_CAN_FILTER_SCALE_32BIT
+} hal_can_filter_scale_t;
+
+/**
+ * @brief CAN filter fifo assignment definitions
+ */
+typedef enum {
+    HAL_CAN_FILTER_FIFO0 = 0,
+    HAL_CAN_FILTER_FIFO1
+} hal_can_filter_fifo_t;
+
+/**
+ * @brief CAN frame format definitions
+ */
+typedef enum {
+    HAL_CAN_FRAME_STANDARD = 0,
+    HAL_CAN_FRAME_EXTENDED
+} hal_can_frame_format_t;
+
+/**
+ * @brief CAN frame type definitions
+ */
+typedef enum {
+    HAL_CAN_FRAME_DATA = 0,
+    HAL_CAN_FRAME_REMOTE
+} hal_can_frame_type_t;
+
+/**
+ * @brief CAN filter configuration structure
+ */
+typedef struct {
+    uint8_t filter_id;
+    hal_can_filter_mode_t mode;
+    hal_can_filter_scale_t scale;
+    hal_can_filter_fifo_t fifo_assignment;
+    uint32_t filter_mask_id_high;
+    uint32_t filter_mask_id_low;
+    uint32_t filter_id_high;
+    uint32_t filter_id_low;
+    uint8_t filter_enable;
+} hal_can_filter_config_t;
+
+/**
+ * @brief CAN configuration structure
+ */
+typedef struct {
+    hal_can_instance_t instance;
+    hal_can_mode_t mode;
+    uint32_t prescaler;
+    uint8_t sync_jump_width;
+    uint8_t time_segment1;
+    uint8_t time_segment2;
+    uint8_t filter_count;
+    const hal_can_filter_config_t* filters;
+} hal_can_config_t;
+
+/**
+ * @brief CAN message structure
+ */
+typedef struct {
+    hal_can_frame_format_t format;
+    hal_can_frame_type_t type;
+    uint32_t id;
+    uint8_t dlc;
+    uint8_t data[8];
+} hal_can_message_t;
+
+/**
+ * @brief Initialize CAN hardware
+ * @param config: CAN configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_init(const hal_can_config_t *config);
+
+/**
+ * @brief Deinitialize CAN hardware
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_deinit(hal_can_instance_t instance);
+
+/**
+ * @brief Start CAN peripheral
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_start(hal_can_instance_t instance);
+
+/**
+ * @brief Stop CAN peripheral
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_stop(hal_can_instance_t instance);
+
+/**
+ * @brief Send CAN message
+ * @param instance: CAN instance identifier
+ * @param message: Pointer to CAN message structure
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_send(hal_can_instance_t instance, const hal_can_message_t *message, uint32_t timeout);
+
+/**
+ * @brief Receive CAN message
+ * @param instance: CAN instance identifier
+ * @param fifo: FIFO number (0 or 1)
+ * @param message: Pointer to CAN message structure
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_receive(hal_can_instance_t instance, uint8_t fifo, hal_can_message_t *message, uint32_t timeout);
+
+/**
+ * @brief Get CAN receive FIFO message pending count
+ * @param instance: CAN instance identifier
+ * @param fifo: FIFO number (0 or 1)
+ * @param count: Pointer to store pending message count
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_get_pending_count(hal_can_instance_t instance, uint8_t fifo, uint8_t *count);
+
+/**
+ * @brief Configure CAN filter
+ * @param instance: CAN instance identifier
+ * @param filter_config: Pointer to CAN filter configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_can_configure_filter(hal_can_instance_t instance, const hal_can_filter_config_t *filter_config);
+
+#endif /* HAL_CAN_H */

HAL/Inc/hal_gpio.h

@@ -10,6 +10,8 @@
 #ifndef HAL_GPIO_H
 #define HAL_GPIO_H
 
+#include "hal.h"
+
 /**
  * @brief GPIO pin state definitions
  */
@@ -105,29 +107,33 @@ typedef struct {
 
 /**
  * @brief Initialize GPIO hardware
+ * @retval HAL status code
  */
-void hal_gpio_init(void);
+hal_ret_t hal_gpio_init(void);
 
 /**
  * @brief Configure GPIO pin
  * @param config: GPIO configuration structure
+ * @retval HAL status code
  */
-void hal_gpio_configure_pin(const hal_gpio_config_t *config);
+hal_ret_t hal_gpio_configure_pin(const hal_gpio_config_t *config);
 
 /**
  * @brief Write GPIO pin state
  * @param port: GPIO port
  * @param pin: GPIO pin
  * @param state: GPIO pin state
+ * @retval HAL status code
  */
-void hal_gpio_write_pin(hal_gpio_port_t port, hal_gpio_pin_t pin, hal_gpio_pin_state_t state);
+hal_ret_t hal_gpio_write_pin(hal_gpio_port_t port, hal_gpio_pin_t pin, hal_gpio_pin_state_t state);
 
 /**
  * @brief Toggle GPIO pin state
  * @param port: GPIO port
  * @param pin: GPIO pin
+ * @retval HAL status code
  */
-void hal_gpio_toggle_pin(hal_gpio_port_t port, hal_gpio_pin_t pin);
+hal_ret_t hal_gpio_toggle_pin(hal_gpio_port_t port, hal_gpio_pin_t pin);
 
 /**
  * @brief Read GPIO pin state

HAL/Inc/hal_i2c.h

@@ -0,0 +1,125 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_i2c.h
+  * @brief          : I2C hardware abstraction layer header file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#ifndef HAL_I2C_H
+#define HAL_I2C_H
+
+#include <stdint.h>
+#include <stddef.h>
+#include "hal.h"
+
+/**
+ * @brief I2C instance identifier definitions
+ */
+typedef enum {
+    HAL_I2C_INSTANCE_1 = 0,
+    HAL_I2C_INSTANCE_2,
+    HAL_I2C_INSTANCE_3,
+    HAL_I2C_INSTANCE_4,
+    HAL_I2C_INSTANCE_MAX
+} hal_i2c_instance_t;
+
+/**
+ * @brief I2C clock speed definitions
+ */
+typedef enum {
+    HAL_I2C_SPEED_STANDARD = 100000U,    /*!< Standard speed (100 kHz) */
+    HAL_I2C_SPEED_FAST = 400000U,        /*!< Fast speed (400 kHz) */
+    HAL_I2C_SPEED_FAST_PLUS = 1000000U,  /*!< Fast plus speed (1 MHz) */
+    HAL_I2C_SPEED_HIGH = 3400000U        /*!< High speed (3.4 MHz) */
+} hal_i2c_speed_t;
+
+/**
+ * @brief I2C address mode definitions
+ */
+typedef enum {
+    HAL_I2C_ADDRESS_7BIT = 0,
+    HAL_I2C_ADDRESS_10BIT
+} hal_i2c_address_mode_t;
+
+/**
+ * @brief I2C duty cycle definitions
+ */
+typedef enum {
+    HAL_I2C_DUTYCYCLE_2 = 0,
+    HAL_I2C_DUTYCYCLE_16_9
+} hal_i2c_dutycycle_t;
+
+/**
+ * @brief I2C configuration structure
+ */
+typedef struct {
+    hal_i2c_instance_t instance;
+    hal_i2c_speed_t speed;
+    hal_i2c_address_mode_t address_mode;
+    hal_i2c_dutycycle_t dutycycle;
+    uint16_t own_address1;
+    uint32_t timeout;
+} hal_i2c_config_t;
+
+/**
+ * @brief Initialize I2C hardware
+ * @param config: I2C configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_init(const hal_i2c_config_t *config);
+
+/**
+ * @brief Deinitialize I2C hardware
+ * @param instance: I2C instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_deinit(hal_i2c_instance_t instance);
+
+/**
+ * @brief Transmit data to I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param data: Pointer to data buffer
+ * @param length: Data length in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_master_transmit(hal_i2c_instance_t instance, uint16_t dev_address, const uint8_t *data, uint16_t length, uint32_t timeout);
+
+/**
+ * @brief Receive data from I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param data: Pointer to data buffer
+ * @param length: Data length to receive in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_master_receive(hal_i2c_instance_t instance, uint16_t dev_address, uint8_t *data, uint16_t length, uint32_t timeout);
+
+/**
+ * @brief Transmit and receive data from I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param tx_data: Pointer to transmit data buffer
+ * @param tx_length: Transmit data length in bytes
+ * @param rx_data: Pointer to receive data buffer
+ * @param rx_length: Receive data length in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_master_transmit_receive(hal_i2c_instance_t instance, uint16_t dev_address, const uint8_t *tx_data, uint16_t tx_length, uint8_t *rx_data, uint16_t rx_length, uint32_t timeout);
+
+/**
+ * @brief Check if I2C bus is ready
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param trials: Number of trials
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_i2c_is_device_ready(hal_i2c_instance_t instance, uint16_t dev_address, uint32_t trials, uint32_t timeout);
+
+#endif /* HAL_I2C_H */

HAL/Inc/hal_spi.h

@@ -13,6 +13,7 @@
 #include <stdint.h>
 #include <stddef.h>
 #include <stdbool.h>
+#include "hal.h"
 
 /**
  * @brief SPI instance identifier definitions
@@ -75,34 +76,34 @@ typedef struct {
  * @brief Initialize SPI hardware
  * @param instance SPI instance identifier
  * @param config SPI configuration structure
- * @return true if initialization is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_init(hal_spi_instance_t instance, const hal_spi_config_t *config);
+hal_ret_t hal_spi_init(hal_spi_instance_t instance, const hal_spi_config_t *config);
 
 /**
  * @brief Deinitialize SPI hardware
  * @param instance SPI instance identifier
- * @return true if deinitialization is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_deinit(hal_spi_instance_t instance);
+hal_ret_t hal_spi_deinit(hal_spi_instance_t instance);
 
 /**
  * @brief Transmit data over specific SPI instance
  * @param instance: SPI instance identifier
  * @param data: Pointer to data buffer
  * @param size: Data length in bytes
- * @return true if transmission is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_transmit(hal_spi_instance_t instance, const uint8_t *data, uint16_t size);
+hal_ret_t hal_spi_transmit(hal_spi_instance_t instance, const uint8_t *data, uint16_t size);
 
 /**
  * @brief Receive data from specific SPI instance
  * @param instance: SPI instance identifier
  * @param data: Pointer to data buffer
  * @param size: Data length to receive in bytes
- * @return true if reception is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_receive(hal_spi_instance_t instance, uint8_t *data, uint16_t size);
+hal_ret_t hal_spi_receive(hal_spi_instance_t instance, uint8_t *data, uint16_t size);
 
 /**
  * @brief Transmit and receive data simultaneously over specific SPI instance
@@ -110,8 +111,8 @@ bool hal_spi_receive(hal_spi_instance_t instance, uint8_t *data, uint16_t size);
  * @param tx_data: Pointer to transmit data buffer
  * @param rx_data: Pointer to receive data buffer
  * @param size: Data length in bytes
- * @return true if transmission and reception are successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_transmit_receive(hal_spi_instance_t instance, const uint8_t *tx_data, uint8_t *rx_data, uint16_t size);
+hal_ret_t hal_spi_transmit_receive(hal_spi_instance_t instance, const uint8_t *tx_data, uint8_t *rx_data, uint16_t size);
 
 #endif /* HAL_SPI_H */

HAL/Inc/hal_uart.h

@@ -12,6 +12,7 @@
 
 #include <stdint.h>
 #include <stddef.h>
+#include "hal.h"
 
 /**
  * @brief UART parity definitions
@@ -64,44 +65,50 @@ typedef struct {
 
 /**
  * @brief Initialize UART hardware
+ * @retval HAL status code
  */
-void hal_uart_init(void);
+hal_ret_t hal_uart_init(void);
 
 /**
  * @brief Configure UART parameters for specific instance
  * @param config: UART configuration structure
+ * @retval HAL status code
  */
-void hal_uart_config(const hal_uart_config_t *config);
+hal_ret_t hal_uart_config(const hal_uart_config_t *config);
 
 /**
  * @brief Send data over specific UART instance
  * @param instance: UART instance identifier
  * @param data: Pointer to data buffer
  * @param length: Data length in bytes
+ * @retval HAL status code
  */
-void hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t length);
+hal_ret_t hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t length);
 
 /**
  * @brief Receive data from specific UART instance
  * @param instance: UART instance identifier
  * @param data: Pointer to data buffer
  * @param length: Data length to receive in bytes
- * @retval Number of bytes received
+ * @param received: Pointer to store number of bytes received
+ * @retval HAL status code
  */
-size_t hal_uart_receive(hal_uart_instance_t instance, uint8_t *data, size_t length);
+hal_ret_t hal_uart_receive(hal_uart_instance_t instance, uint8_t *data, size_t length, size_t *received);
 
 /**
  * @brief Check if specific UART instance is ready to send
  * @param instance: UART instance identifier
- * @retval 1 if ready, 0 otherwise
+ * @param ready: Pointer to store ready status (1 if ready, 0 otherwise)
+ * @retval HAL status code
  */
-uint8_t hal_uart_is_tx_ready(hal_uart_instance_t instance);
+hal_ret_t hal_uart_is_tx_ready(hal_uart_instance_t instance, uint8_t *ready);
 
 /**
  * @brief Check if specific UART instance has data to receive
  * @param instance: UART instance identifier
- * @retval 1 if data available, 0 otherwise
+ * @param ready: Pointer to store ready status (1 if data available, 0 otherwise)
+ * @retval HAL status code
  */
-uint8_t hal_uart_is_rx_ready(hal_uart_instance_t instance);
+hal_ret_t hal_uart_is_rx_ready(hal_uart_instance_t instance, uint8_t *ready);
 
 #endif /* HAL_UART_H */

HAL/Src/hal.c

@@ -8,15 +8,343 @@
 /* USER CODE END Header */
 
 #include "hal.h"
+#include <string.h>
+
+/**
+ * @brief HAL module registry
+ */
+static hal_module_config_t hal_module_registry[HAL_MODULE_MAX];
+static uint32_t hal_module_count = 0;
+
+/**
+ * @brief HAL error context
+ */
+static hal_error_context_t hal_error_ctx = {
+    .callback = NULL,
+    .error_count = 0,
+    .enabled = 1
+};
 
 /**
  * @brief HAL module initialization
+ * @retval HAL status code
  */
-void hal_init(void) {
+hal_ret_t hal_init(void) {
+    hal_ret_t status = HAL_RET_OK;
+    
+    /* Clear module registry */
+    memset(hal_module_registry, 0, sizeof(hal_module_registry));
+    hal_module_count = 0;
+    
+    /* Initialize error handling system */
+    status = hal_error_init();
+    if (status != HAL_RET_OK) {
+        return status;
+    }
+    
     /* Call architecture specific initialization */
-#if HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    hal_stm32f1_init();
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
     hal_stm32f4_init();
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    hal_stm32f7_init();
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    hal_stm32l4_init();
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Register a HAL module
+ * @param module_config: Module configuration
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_register(const hal_module_config_t* module_config) {
+    if (module_config == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (module_config->type >= HAL_MODULE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    /* Check if module already registered */
+    if (hal_module_registry[module_config->type].ops.init != NULL) {
+        return HAL_RET_RESOURCE_LOCKED;
+    }
+    
+    /* Register the module */
+    memcpy(&hal_module_registry[module_config->type], module_config, sizeof(hal_module_config_t));
+    hal_module_count++;
+    
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Initialize a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_init(hal_module_type_t module_type, hal_handle_t* handle) {
+    if (module_type >= HAL_MODULE_MAX || handle == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (hal_module_registry[module_type].ops.init == NULL) {
+        return HAL_RET_NOT_SUPPORTED;
+    }
+    
+    /* Initialize handle if not already initialized */
+    if (handle->status == HAL_PERIPH_STATE_RESET) {
+        HAL_HANDLE_INIT(handle);
+        handle->status = HAL_PERIPH_STATE_READY;
+    }
+    
+    return hal_module_registry[module_type].ops.init(handle);
+}
+
+/**
+ * @brief Deinitialize a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_deinit(hal_module_type_t module_type, hal_handle_t* handle) {
+    if (module_type >= HAL_MODULE_MAX || handle == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (hal_module_registry[module_type].ops.deinit == NULL) {
+        return HAL_RET_NOT_SUPPORTED;
+    }
+    
+    hal_ret_t status = hal_module_registry[module_type].ops.deinit(handle);
+    if (status == HAL_RET_OK) {
+        handle->status = HAL_PERIPH_STATE_RESET;
+    }
+    
+    return status;
+}
+
+/**
+ * @brief Configure a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param config: Module configuration data
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_configure(hal_module_type_t module_type, hal_handle_t* handle, void* config) {
+    if (module_type >= HAL_MODULE_MAX || handle == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (hal_module_registry[module_type].ops.configure == NULL) {
+        return HAL_RET_NOT_SUPPORTED;
+    }
+    
+    return hal_module_registry[module_type].ops.configure(handle, config);
+}
+
+/**
+ * @brief Control a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param cmd: Control command
+ * @param param: Control parameter
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_control(hal_module_type_t module_type, hal_handle_t* handle, uint32_t cmd, void* param) {
+    if (module_type >= HAL_MODULE_MAX || handle == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (hal_module_registry[module_type].ops.control == NULL) {
+        return HAL_RET_NOT_SUPPORTED;
+    }
+    
+    return hal_module_registry[module_type].ops.control(handle, cmd, param);
+}
+
+/**
+ * @brief Get status of a specific HAL module
+ * @param module_type: Module type
+ * @param handle: HAL handle for the module
+ * @param status: Pointer to store module status
+ * @retval HAL status code
+ */
+hal_ret_t hal_module_get_status(hal_module_type_t module_type, hal_handle_t* handle, uint32_t* status) {
+    if (module_type >= HAL_MODULE_MAX || handle == NULL || status == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (hal_module_registry[module_type].ops.get_status == NULL) {
+        return HAL_RET_NOT_SUPPORTED;
+    }
+    
+    return hal_module_registry[module_type].ops.get_status(handle, status);
+}
+
+/**
+ * @brief Get default configuration for a module
+ * @param module_type: Module type
+ * @return Pointer to default configuration, or NULL if not available
+ */
+void* hal_module_get_default_config(hal_module_type_t module_type) {
+    if (module_type >= HAL_MODULE_MAX) {
+        return NULL;
+    }
+    
+    return hal_module_registry[module_type].default_config;
+}
+
+/**
+ * @brief Get HAL version information
+ * @param major: Pointer to store major version
+ * @param minor: Pointer to store minor version
+ * @param patch: Pointer to store patch version
+ * @retval HAL status code
+ */
+hal_ret_t hal_get_version(uint8_t* major, uint8_t* minor, uint8_t* patch) {
+    if (major == NULL || minor == NULL || patch == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    *major = HAL_VERSION_MAJOR;
+    *minor = HAL_VERSION_MINOR;
+    *patch = HAL_VERSION_PATCH;
+    
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Get HAL version string
+ * @retval Version string
+ */
+const char* hal_get_version_string(void) {
+    return HAL_VERSION_STRING;
+}
+
+/**
+ * @brief Get HAL module count
+ * @retval Number of registered HAL modules
+ */
+uint32_t hal_get_module_count(void) {
+    return hal_module_count;
+}
+
+/**
+ * @brief Get HAL module configuration
+ * @param module_type: Module type
+ * @retval Pointer to module configuration, or NULL if not found
+ */
+const hal_module_config_t* hal_get_module_config(hal_module_type_t module_type) {
+    if (module_type >= HAL_MODULE_MAX) {
+        return NULL;
+    }
+    
+    if (hal_module_registry[module_type].ops.init == NULL) {
+        return NULL;
+    }
+    
+    return &hal_module_registry[module_type];
+}
+
+/**
+ * @brief Initialize HAL error handling system
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_init(void) {
+    memset(&hal_error_ctx.last_error, 0, sizeof(hal_error_t));
+    hal_error_ctx.error_count = 0;
+    hal_error_ctx.enabled = 1;
+    hal_error_ctx.callback = NULL;
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Deinitialize HAL error handling system
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_deinit(void) {
+    hal_error_ctx.enabled = 0;
+    hal_error_ctx.callback = NULL;
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Register an error callback function
+ * @param callback: Error callback function
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_register_callback(hal_error_callback_t callback) {
+    hal_error_ctx.callback = callback;
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Record an error
+ * @param error: Pointer to error information
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_record(const hal_error_t* error) {
+    if (error == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (!hal_error_ctx.enabled) {
+        return HAL_RET_OK;
+    }
+    
+    /* Copy error information */
+    memcpy(&hal_error_ctx.last_error, error, sizeof(hal_error_t));
+    hal_error_ctx.error_count++;
+    
+    /* Call error callback if registered */
+    if (hal_error_ctx.callback != NULL) {
+        hal_error_ctx.callback(error);
+    }
+    
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Get last error information
+ * @retval Pointer to last error information
+ */
+const hal_error_t* hal_error_get_last(void) {
+    return &hal_error_ctx.last_error;
+}
+
+/**
+ * @brief Get total error count
+ * @retval Total error count
+ */
+uint32_t hal_error_get_count(void) {
+    return hal_error_ctx.error_count;
+}
+
+/**
+ * @brief Clear error information
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_clear(void) {
+    memset(&hal_error_ctx.last_error, 0, sizeof(hal_error_t));
+    hal_error_ctx.error_count = 0;
+    return HAL_RET_OK;
+}
+
+/**
+ * @brief Enable/disable error logging
+ * @param enable: Enable flag (1 to enable, 0 to disable)
+ * @retval HAL status code
+ */
+hal_ret_t hal_error_enable(uint8_t enable) {
+    hal_error_ctx.enabled = enable;
+    return HAL_RET_OK;
 }

HAL/Src/hal_adc.c

@@ -0,0 +1,313 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_adc.c
+  * @brief          : ADC hardware abstraction layer source file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#include "hal.h"
+#include "hal_adc.h"
+
+/**
+ * @brief Initialize ADC hardware
+ * @param config: ADC configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_init(const hal_adc_config_t *config) {
+    if (config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (config->instance >= HAL_ADC_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC initialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC initialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Deinitialize ADC hardware
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_deinit(hal_adc_instance_t instance) {
+    if (instance >= HAL_ADC_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC deinitialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC deinitialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Start ADC conversion
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_start(hal_adc_instance_t instance) {
+    if (instance >= HAL_ADC_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC start implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC start */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Stop ADC conversion
+ * @param instance: ADC instance identifier
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_stop(hal_adc_instance_t instance) {
+    if (instance >= HAL_ADC_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC stop implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC stop */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Get ADC conversion value
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @param value: Pointer to store conversion value
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_get_value(hal_adc_instance_t instance, hal_adc_channel_t channel, uint16_t *value, uint32_t timeout) {
+    if (value == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_ADC_INSTANCE_MAX || channel >= HAL_ADC_CHANNEL_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC get value implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC get value */
+    *value = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC get value */
+    *value = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC get value */
+    *value = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC get value */
+    *value = 0;
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Get multiple ADC conversion values
+ * @param instance: ADC instance identifier
+ * @param values: Pointer to store conversion values
+ * @param length: Number of values to get
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_get_values(hal_adc_instance_t instance, uint16_t *values, uint8_t length, uint32_t timeout) {
+    if (values == NULL || length == 0) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_ADC_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC get values implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC get values */
+    for (uint8_t i = 0; i < length; i++) {
+        values[i] = 0;
+    }
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC get values */
+    for (uint8_t i = 0; i < length; i++) {
+        values[i] = 0;
+    }
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC get values */
+    for (uint8_t i = 0; i < length; i++) {
+        values[i] = 0;
+    }
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC get values */
+    for (uint8_t i = 0; i < length; i++) {
+        values[i] = 0;
+    }
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Configure ADC channel
+ * @param instance: ADC instance identifier
+ * @param config: ADC channel configuration structure
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_configure_channel(hal_adc_instance_t instance, const hal_adc_channel_config_t *config) {
+    if (config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_ADC_INSTANCE_MAX || config->channel >= HAL_ADC_CHANNEL_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC channel configuration implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC channel configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC channel configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC channel configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC channel configuration */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Enable ADC channel
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_enable_channel(hal_adc_instance_t instance, hal_adc_channel_t channel) {
+    if (instance >= HAL_ADC_INSTANCE_MAX || channel >= HAL_ADC_CHANNEL_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC channel enable implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC channel enable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC channel enable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC channel enable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC channel enable */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Disable ADC channel
+ * @param instance: ADC instance identifier
+ * @param channel: ADC channel
+ * @retval HAL status code
+ */
+hal_ret_t hal_adc_disable_channel(hal_adc_instance_t instance, hal_adc_channel_t channel) {
+    if (instance >= HAL_ADC_INSTANCE_MAX || channel >= HAL_ADC_CHANNEL_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific ADC channel disable implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 ADC channel disable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 ADC channel disable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 ADC channel disable */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 ADC channel disable */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}

HAL/Src/hal_can.c

@@ -0,0 +1,275 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_can.c
+  * @brief          : CAN hardware abstraction layer source file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#include "hal.h"
+#include "hal_can.h"
+
+/**
+ * @brief Initialize CAN hardware
+ * @param config: CAN configuration structure
+ * @retval HAL status code
+ */
+hal_status_t hal_can_init(const hal_can_config_t *config) {
+    if (config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (config->instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN initialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN initialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Deinitialize CAN hardware
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_status_t hal_can_deinit(hal_can_instance_t instance) {
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN deinitialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN deinitialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Start CAN peripheral
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_status_t hal_can_start(hal_can_instance_t instance) {
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN start implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN start */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN start */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Stop CAN peripheral
+ * @param instance: CAN instance identifier
+ * @retval HAL status code
+ */
+hal_status_t hal_can_stop(hal_can_instance_t instance) {
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN stop implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN stop */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN stop */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Send CAN message
+ * @param instance: CAN instance identifier
+ * @param message: Pointer to CAN message structure
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_can_send(hal_can_instance_t instance, const hal_can_message_t *message, uint32_t timeout) {
+    if (message == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN send implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN send */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN send */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN send */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN send */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Receive CAN message
+ * @param instance: CAN instance identifier
+ * @param fifo: FIFO number (0 or 1)
+ * @param message: Pointer to CAN message structure
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_can_receive(hal_can_instance_t instance, uint8_t fifo, hal_can_message_t *message, uint32_t timeout) {
+    if (message == NULL || fifo > 1) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN receive implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN receive */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Get CAN receive FIFO message pending count
+ * @param instance: CAN instance identifier
+ * @param fifo: FIFO number (0 or 1)
+ * @param count: Pointer to store pending message count
+ * @retval HAL status code
+ */
+hal_status_t hal_can_get_pending_count(hal_can_instance_t instance, uint8_t fifo, uint8_t *count) {
+    if (count == NULL || fifo > 1) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN get pending count implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN get pending count */
+    *count = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN get pending count */
+    *count = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN get pending count */
+    *count = 0;
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN get pending count */
+    *count = 0;
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Configure CAN filter
+ * @param instance: CAN instance identifier
+ * @param filter_config: Pointer to CAN filter configuration structure
+ * @retval HAL status code
+ */
+hal_status_t hal_can_configure_filter(hal_can_instance_t instance, const hal_can_filter_config_t *filter_config) {
+    if (filter_config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_CAN_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific CAN filter configuration implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 CAN filter configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 CAN filter configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 CAN filter configuration */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 CAN filter configuration */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}

HAL/Src/hal_gpio.c

@@ -9,11 +9,13 @@
 
 #include "hal.h"
 #include "hal_gpio.h"
+#include <stddef.h>
 
 /**
  * @brief Initialize GPIO hardware
+ * @retval HAL status code
  */
-void hal_gpio_init(void) {
+hal_ret_t hal_gpio_init(void) {
     /* Call architecture specific GPIO initialization */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_gpio_init();
@@ -25,14 +27,21 @@ void hal_gpio_init(void) {
     hal_stm32l4_gpio_init();
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
  * @brief Configure GPIO pin
  * @param config: GPIO configuration structure
+ * @retval HAL status code
  */
-void hal_gpio_configure_pin(const hal_gpio_config_t *config) {
+hal_ret_t hal_gpio_configure_pin(const hal_gpio_config_t *config) {
+    if (config == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific GPIO configuration */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_gpio_configure_pin(config);
@@ -44,7 +53,9 @@ void hal_gpio_configure_pin(const hal_gpio_config_t *config) {
     hal_stm32l4_gpio_configure_pin(config);
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
@@ -52,8 +63,14 @@ void hal_gpio_configure_pin(const hal_gpio_config_t *config) {
  * @param port: GPIO port
  * @param pin: GPIO pin
  * @param state: GPIO pin state
+ * @retval HAL status code
  */
-void hal_gpio_write_pin(hal_gpio_port_t port, hal_gpio_pin_t pin, hal_gpio_pin_state_t state) {
+hal_ret_t hal_gpio_write_pin(hal_gpio_port_t port, hal_gpio_pin_t pin, hal_gpio_pin_state_t state) {
+    /* Validate parameters */
+    if (port >= HAL_GPIO_PORT_K + 1 || pin >= HAL_GPIO_PIN_ALL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific GPIO write implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_gpio_write_pin(port, pin, state);
@@ -65,15 +82,23 @@ void hal_gpio_write_pin(hal_gpio_port_t port, hal_gpio_pin_t pin, hal_gpio_pin_s
     hal_stm32l4_gpio_write_pin(port, pin, state);
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
  * @brief Toggle GPIO pin state
  * @param port: GPIO port
  * @param pin: GPIO pin
+ * @retval HAL status code
  */
-void hal_gpio_toggle_pin(hal_gpio_port_t port, hal_gpio_pin_t pin) {
+hal_ret_t hal_gpio_toggle_pin(hal_gpio_port_t port, hal_gpio_pin_t pin) {
+    /* Validate parameters */
+    if (port >= HAL_GPIO_PORT_K + 1 || pin >= HAL_GPIO_PIN_ALL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific GPIO toggle implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_gpio_toggle_pin(port, pin);
@@ -85,7 +110,9 @@ void hal_gpio_toggle_pin(hal_gpio_port_t port, hal_gpio_pin_t pin) {
     hal_stm32l4_gpio_toggle_pin(port, pin);
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**

HAL/Src/hal_i2c.c

@@ -0,0 +1,218 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : hal_i2c.c
+  * @brief          : I2C hardware abstraction layer source file
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+#include "hal.h"
+#include "hal_i2c.h"
+
+/**
+ * @brief Initialize I2C hardware
+ * @param config: I2C configuration structure
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_init(const hal_i2c_config_t *config) {
+    if (config == NULL) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (config->instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C initialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C initialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C initialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Deinitialize I2C hardware
+ * @param instance: I2C instance identifier
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_deinit(hal_i2c_instance_t instance) {
+    if (instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C deinitialization */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C deinitialization */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C deinitialization */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Transmit data to I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param data: Pointer to data buffer
+ * @param length: Data length in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_master_transmit(hal_i2c_instance_t instance, uint16_t dev_address, const uint8_t *data, uint16_t length, uint32_t timeout) {
+    if (data == NULL || length == 0) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C transmit implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C transmit */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C transmit */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C transmit */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C transmit */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Receive data from I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param data: Pointer to data buffer
+ * @param length: Data length to receive in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_master_receive(hal_i2c_instance_t instance, uint16_t dev_address, uint8_t *data, uint16_t length, uint32_t timeout) {
+    if (data == NULL || length == 0) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C receive implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C receive */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Transmit and receive data from I2C slave
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param tx_data: Pointer to transmit data buffer
+ * @param tx_length: Transmit data length in bytes
+ * @param rx_data: Pointer to receive data buffer
+ * @param rx_length: Receive data length in bytes
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_master_transmit_receive(hal_i2c_instance_t instance, uint16_t dev_address, const uint8_t *tx_data, uint16_t tx_length, uint8_t *rx_data, uint16_t rx_length, uint32_t timeout) {
+    if (tx_data == NULL || rx_data == NULL || tx_length == 0 || rx_length == 0) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C transmit and receive implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C transmit and receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C transmit and receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C transmit and receive */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C transmit and receive */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}
+
+/**
+ * @brief Check if I2C bus is ready
+ * @param instance: I2C instance identifier
+ * @param dev_address: Slave device address
+ * @param trials: Number of trials
+ * @param timeout: Timeout in milliseconds
+ * @retval HAL status code
+ */
+hal_status_t hal_i2c_is_device_ready(hal_i2c_instance_t instance, uint16_t dev_address, uint32_t trials, uint32_t timeout) {
+    if (instance >= HAL_I2C_INSTANCE_MAX) {
+        return HAL_INVALID_PARAM;
+    }
+    
+    /* Call architecture specific I2C device ready check implementation */
+#if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
+    /* TODO: Implement STM32F1 I2C device ready check */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
+    /* TODO: Implement STM32F4 I2C device ready check */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
+    /* TODO: Implement STM32F7 I2C device ready check */
+    return HAL_OK;
+#elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
+    /* TODO: Implement STM32L4 I2C device ready check */
+    return HAL_OK;
+#else
+#error "Unsupported HAL architecture"
+    return HAL_ERROR;
+#endif
+}

HAL/Src/hal_spi.c

@@ -15,42 +15,54 @@
  * @brief Initialize SPI hardware
  * @param instance SPI instance identifier
  * @param config SPI configuration structure
- * @return true if initialization is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_init(hal_spi_instance_t instance, const hal_spi_config_t *config) {
+hal_ret_t hal_spi_init(hal_spi_instance_t instance, const hal_spi_config_t *config) {
+    if (config == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_SPI_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific SPI initialization */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_spi_init(instance, config);
+    return hal_stm32f1_spi_init(instance, config) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_spi_init(instance, config);
+    return hal_stm32f4_spi_init(instance, config) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_spi_init(instance, config);
+    return hal_stm32f7_spi_init(instance, config) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_spi_init(instance, config);
+    return hal_stm32l4_spi_init(instance, config) ? HAL_OK : HAL_ERROR;
 #else
 #error "Unsupported HAL architecture"
-    return false;
+    return HAL_RET_ERROR;
 #endif
 }
 
 /**
  * @brief Deinitialize SPI hardware
  * @param instance SPI instance identifier
- * @return true if deinitialization is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_deinit(hal_spi_instance_t instance) {
+hal_ret_t hal_spi_deinit(hal_spi_instance_t instance) {
+    if (instance >= HAL_SPI_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific SPI deinitialization */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_spi_deinit(instance);
+    return hal_stm32f1_spi_deinit(instance) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_spi_deinit(instance);
+    return hal_stm32f4_spi_deinit(instance) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_spi_deinit(instance);
+    return hal_stm32f7_spi_deinit(instance) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_spi_deinit(instance);
+    return hal_stm32l4_spi_deinit(instance) ? HAL_OK : HAL_ERROR;
 #else
 #error "Unsupported HAL architecture"
-    return false;
+    return HAL_RET_ERROR;
 #endif
 }
 
@@ -59,21 +71,29 @@ bool hal_spi_deinit(hal_spi_instance_t instance) {
  * @param instance SPI instance identifier
  * @param p_data Pointer to data buffer to transmit
  * @param size Size of data to transmit
- * @return true if transmission is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_transmit(hal_spi_instance_t instance, const uint8_t *p_data, uint16_t size) {
+hal_ret_t hal_spi_transmit(hal_spi_instance_t instance, const uint8_t *p_data, uint16_t size) {
+    if (p_data == NULL || size == 0) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_SPI_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific SPI transmit implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_spi_transmit(instance, p_data, size);
+    return hal_stm32f1_spi_transmit(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_spi_transmit(instance, p_data, size);
+    return hal_stm32f4_spi_transmit(instance, p_data, size) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_spi_transmit(instance, p_data, size);
+    return hal_stm32f7_spi_transmit(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_spi_transmit(instance, p_data, size);
+    return hal_stm32l4_spi_transmit(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #else
 #error "Unsupported HAL architecture"
-    return false;
+    return HAL_RET_ERROR;
 #endif
 }
 
@@ -82,21 +102,29 @@ bool hal_spi_transmit(hal_spi_instance_t instance, const uint8_t *p_data, uint16
  * @param instance SPI instance identifier
  * @param p_data Pointer to data buffer to receive
  * @param size Size of data to receive
- * @return true if reception is successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_receive(hal_spi_instance_t instance, uint8_t *p_data, uint16_t size) {
+hal_ret_t hal_spi_receive(hal_spi_instance_t instance, uint8_t *p_data, uint16_t size) {
+    if (p_data == NULL || size == 0) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_SPI_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific SPI receive implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_spi_receive(instance, p_data, size);
+    return hal_stm32f1_spi_receive(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_spi_receive(instance, p_data, size);
+    return hal_stm32f4_spi_receive(instance, p_data, size) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_spi_receive(instance, p_data, size);
+    return hal_stm32f7_spi_receive(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_spi_receive(instance, p_data, size);
+    return hal_stm32l4_spi_receive(instance, p_data, size) ? HAL_OK : HAL_ERROR;
 #else
 #error "Unsupported HAL architecture"
-    return false;
+    return HAL_RET_ERROR;
 #endif
 }
 
@@ -106,20 +134,28 @@ bool hal_spi_receive(hal_spi_instance_t instance, uint8_t *p_data, uint16_t size
  * @param p_tx_data Pointer to data buffer to transmit
  * @param p_rx_data Pointer to data buffer to receive
  * @param size Size of data to transmit/receive
- * @return true if transmission and reception are successful, false otherwise
+ * @retval HAL status code
  */
-bool hal_spi_transmit_receive(hal_spi_instance_t instance, const uint8_t *p_tx_data, uint8_t *p_rx_data, uint16_t size) {
+hal_ret_t hal_spi_transmit_receive(hal_spi_instance_t instance, const uint8_t *p_tx_data, uint8_t *p_rx_data, uint16_t size) {
+    if (p_tx_data == NULL || p_rx_data == NULL || size == 0) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_SPI_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific SPI transmit and receive implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_spi_transmit_receive(instance, p_tx_data, p_rx_data, size);
+    return hal_stm32f1_spi_transmit_receive(instance, p_tx_data, p_rx_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_spi_transmit_receive(instance, p_tx_data, p_rx_data, size);
+    return hal_stm32f4_spi_transmit_receive(instance, p_tx_data, p_rx_data, size) ? HAL_RET_OK : HAL_RET_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_spi_transmit_receive(instance, p_tx_data, p_rx_data, size);
+    return hal_stm32f7_spi_transmit_receive(instance, p_tx_data, p_rx_data, size) ? HAL_OK : HAL_ERROR;
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_spi_transmit_receive(instance, p_tx_data, p_rx_data, size);
+    return hal_stm32l4_spi_transmit_receive(instance, p_tx_data, p_rx_data, size) ? HAL_OK : HAL_ERROR;
 #else
 #error "Unsupported HAL architecture"
-    return false;
+    return HAL_RET_ERROR;
 #endif
 }

HAL/Src/hal_uart.c

@@ -12,8 +12,9 @@
 
 /**
  * @brief Initialize UART hardware
+ * @retval HAL status code
  */
-void hal_uart_init(void) {
+hal_ret_t hal_uart_init(void) {
     /* Call architecture specific UART initialization */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_uart_init();
@@ -25,14 +26,25 @@ void hal_uart_init(void) {
     hal_stm32l4_uart_init();
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
  * @brief Configure UART parameters for specific instance
  * @param config: UART configuration structure
+ * @retval HAL status code
  */
-void hal_uart_config(const hal_uart_config_t *config) {
+hal_ret_t hal_uart_config(const hal_uart_config_t *config) {
+    if (config == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (config->instance >= HAL_UART_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific UART configuration */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_uart_config(config);
@@ -44,7 +56,9 @@ void hal_uart_config(const hal_uart_config_t *config) {
     hal_stm32l4_uart_config(config);
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
@@ -52,8 +66,17 @@ void hal_uart_config(const hal_uart_config_t *config) {
  * @param instance: UART instance identifier
  * @param data: Pointer to data buffer
  * @param length: Data length in bytes
+ * @retval HAL status code
  */
-void hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t length) {
+hal_ret_t hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t length) {
+    if (data == NULL || length == 0) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_UART_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific UART send implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
     hal_stm32f1_uart_send(instance, data, length);
@@ -65,7 +88,9 @@ void hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t len
     hal_stm32l4_uart_send(instance, data, length);
 #else
 #error "Unsupported HAL architecture"
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
@@ -73,62 +98,92 @@ void hal_uart_send(hal_uart_instance_t instance, const uint8_t *data, size_t len
  * @param instance: UART instance identifier
  * @param data: Pointer to data buffer
  * @param length: Data length to receive in bytes
- * @retval Number of bytes received
+ * @param received: Pointer to store number of bytes received
+ * @retval HAL status code
  */
-size_t hal_uart_receive(hal_uart_instance_t instance, uint8_t *data, size_t length) {
+hal_ret_t hal_uart_receive(hal_uart_instance_t instance, uint8_t *data, size_t length, size_t *received) {
+    if (data == NULL || received == NULL || length == 0) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_UART_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific UART receive implementation */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_uart_receive(instance, data, length);
+    *received = hal_stm32f1_uart_receive(instance, data, length);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_uart_receive(instance, data, length);
+    *received = hal_stm32f4_uart_receive(instance, data, length);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_uart_receive(instance, data, length);
+    *received = hal_stm32f7_uart_receive(instance, data, length);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_uart_receive(instance, data, length);
+    *received = hal_stm32l4_uart_receive(instance, data, length);
 #else
 #error "Unsupported HAL architecture"
-    return 0;
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
  * @brief Check if specific UART instance is ready to send
  * @param instance: UART instance identifier
- * @retval 1 if ready, 0 otherwise
+ * @param ready: Pointer to store ready status (1 if ready, 0 otherwise)
+ * @retval HAL status code
  */
-uint8_t hal_uart_is_tx_ready(hal_uart_instance_t instance) {
+hal_ret_t hal_uart_is_tx_ready(hal_uart_instance_t instance, uint8_t *ready) {
+    if (ready == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_UART_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific UART TX ready check */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_uart_is_tx_ready(instance);
+    *ready = hal_stm32f1_uart_is_tx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_uart_is_tx_ready(instance);
+    *ready = hal_stm32f4_uart_is_tx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_uart_is_tx_ready(instance);
+    *ready = hal_stm32f7_uart_is_tx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_uart_is_tx_ready(instance);
+    *ready = hal_stm32l4_uart_is_tx_ready(instance);
 #else
 #error "Unsupported HAL architecture"
-    return 0;
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }
 
 /**
  * @brief Check if specific UART instance has data to receive
  * @param instance: UART instance identifier
- * @retval 1 if data available, 0 otherwise
+ * @param ready: Pointer to store ready status (1 if data available, 0 otherwise)
+ * @retval HAL status code
  */
-uint8_t hal_uart_is_rx_ready(hal_uart_instance_t instance) {
+hal_ret_t hal_uart_is_rx_ready(hal_uart_instance_t instance, uint8_t *ready) {
+    if (ready == NULL) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
+    if (instance >= HAL_UART_INSTANCE_MAX) {
+        return HAL_RET_INVALID_PARAM;
+    }
+    
     /* Call architecture specific UART RX ready check */
 #if HAL_TARGET_ARCH == HAL_ARCH_STM32F1
-    return hal_stm32f1_uart_is_rx_ready(instance);
+    *ready = hal_stm32f1_uart_is_rx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F4
-    return hal_stm32f4_uart_is_rx_ready(instance);
+    *ready = hal_stm32f4_uart_is_rx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32F7
-    return hal_stm32f7_uart_is_rx_ready(instance);
+    *ready = hal_stm32f7_uart_is_rx_ready(instance);
 #elif HAL_TARGET_ARCH == HAL_ARCH_STM32L4
-    return hal_stm32l4_uart_is_rx_ready(instance);
+    *ready = hal_stm32l4_uart_is_rx_ready(instance);
 #else
 #error "Unsupported HAL architecture"
-    return 0;
+    return HAL_RET_ERROR;
 #endif
+    return HAL_RET_OK;
 }

Modules/uart/src/uart.c

@@ -85,7 +85,9 @@ size_t uart_receive(uint8_t *data, size_t length) {
         return 0;
     }
     
-    return hal_uart_receive(uart.config.instance, data, length);
+    size_t received = 0;
+    hal_uart_receive(uart.config.instance, data, length, &received);
+    return received;
 }
 
 /**
@@ -93,7 +95,9 @@ size_t uart_receive(uint8_t *data, size_t length) {
  * @retval 1 if ready, 0 otherwise
  */
 uint8_t uart_is_tx_ready(void) {
-    return hal_uart_is_tx_ready(uart.config.instance);
+    uint8_t ready = 0;
+    hal_uart_is_tx_ready(uart.config.instance, &ready);
+    return ready;
 }
 
 /**
@@ -101,5 +105,7 @@ uint8_t uart_is_tx_ready(void) {
  * @retval 1 if data available, 0 otherwise
  */
 uint8_t uart_is_rx_ready(void) {
-    return hal_uart_is_rx_ready(uart.config.instance);
+    uint8_t ready = 0;
+    hal_uart_is_rx_ready(uart.config.instance, &ready);
+    return ready;
 }

build/Debug/.ninja_log

@@ -119,3 +119,89 @@
 2181	2249	7908477861665347	Middlewares/logging/liblogging.a	df543b4167ac9a8e
 2186	2268	7908477861722517	BSP/libbsp.a	e0765276282a1d70
 2268	2802	7908477862532836	stm32f407vet6_cmake.elf	4338dca859bbb8b4
+83	278	7908512909651377	Modules/led/CMakeFiles/led.dir/src/led.c.obj	f81c04216db73f61
+15	884	7908515972897402	HAL/CMakeFiles/hal.dir/Src/hal_delay.c.obj	8860d5f0ee1a9236
+24	885	7908515972988356	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4.c.obj	b6e773bf8808077f
+34	1014	7908515973084336	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_delay.c.obj	582888277cddaf7e
+37	1014	7908515973105009	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_spi.c.obj	f7e0911aaf0b3af
+9	1015	7908515972833133	HAL/CMakeFiles/hal.dir/Src/hal.c.obj	f9a0a9727c2eda2b
+12	159	7908518882618028	HAL/CMakeFiles/hal.dir/Src/hal_delay.c.obj	8860d5f0ee1a9236
+21	171	7908518882701350	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4.c.obj	b6e773bf8808077f
+15	174	7908518882653385	HAL/CMakeFiles/hal.dir/Src/hal_uart.c.obj	dfcb3e6b3fe745db
+6	181	7908518882557671	HAL/CMakeFiles/hal.dir/Src/hal.c.obj	f9a0a9727c2eda2b
+63	203	7908518883132879	BSP/CMakeFiles/bsp.dir/Src/bsp_w25qxx.c.obj	77426e3fb0f553e5
+57	214	7908518883061873	BSP/CMakeFiles/bsp.dir/Src/bsp_board_manager.c.obj	fb8792ab3e6d3cb9
+76	216	7908518883250730	Modules/led/CMakeFiles/led.dir/src/led.c.obj	f81c04216db73f61
+80	220	7908518883296695	Middlewares/logging/CMakeFiles/logging.dir/src/logging.c.obj	50c1cd09ee8934e1
+69	226	7908518883194202	BSP/CMakeFiles/bsp.dir/Src/bsp_key.c.obj	1a935290b16864c0
+31	284	7908518882807131	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_delay.c.obj	582888277cddaf7e
+27	284	7908518882761788	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_uart.c.obj	df787ab831e6e2b4
+24	288	7908518882731576	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_gpio.c.obj	b6850ab729e76492
+35	306	7908518882843312	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_spi.c.obj	f7e0911aaf0b3af
+19	107	7908519698989395	BSP/CMakeFiles/bsp.dir/Src/bsp_init.c.obj	eae2726ff6a3757a
+9	85	7908521054971674	HAL/CMakeFiles/hal.dir/Src/hal_spi.c.obj	eac0e356644f7fd0
+12	93	7908521054996808	Modules/uart/CMakeFiles/uart.dir/src/uart.c.obj	4979c5baa76e360d
+12	87	7908523180428921	HAL/CMakeFiles/hal.dir/Src/hal_gpio.c.obj	ab8546ae81e6b910
+17	122	7908523180479324	BSP/CMakeFiles/bsp.dir/Src/stm32f407vet6_board.c.obj	e09f143ebf2c7378
+88	209	7908523181184046	HAL/libhal.a	1cac9cc1eea4712c
+7	83	7908523909563980	Modules/uart/libuart.a	f980800b2f79773c
+20	99	7908523909696088	BSP/libbsp.a	e0765276282a1d70
+28	105	7908523909778142	Modules/led/libled.a	4975295d4e0f5144
+83	162	7908523910322929	Middlewares/logging/liblogging.a	df543b4167ac9a8e
+14	255	7908523909640265	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/main.c.obj	e02e91f67899b94
+256	523	7908523912046776	stm32f407vet6_cmake.elf	4338dca859bbb8b4
+5	81	7908532790141964	BSP/CMakeFiles/bsp.dir/Src/bsp_w25qxx.c.obj	77426e3fb0f553e5
+81	150	7908532790910064	BSP/libbsp.a	e0765276282a1d70
+150	358	7908532791587632	stm32f407vet6_cmake.elf	4338dca859bbb8b4
+3	32	7908532958214568	CMakeFiles/clean.additional	a8e8475892b6c694
+32	52	7908532958506129	clean	48fb0083216ba165
+35	159	7908532960983723	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4.c.obj	b6e773bf8808077f
+54	164	7908532961173437	Modules/delay/CMakeFiles/delay.dir/src/delay.c.obj	dd783bb1ca4e3531
+31	176	7908532960936158	HAL/CMakeFiles/hal.dir/Src/hal_spi.c.obj	eac0e356644f7fd0
+25	195	7908532960878959	HAL/CMakeFiles/hal.dir/Src/hal_delay.c.obj	8860d5f0ee1a9236
+27	215	7908532960905033	HAL/CMakeFiles/hal.dir/Src/hal_uart.c.obj	dfcb3e6b3fe745db
+22	221	7908532960858699	HAL/CMakeFiles/hal.dir/Src/hal_gpio.c.obj	ab8546ae81e6b910
+18	227	7908532960811596	HAL/CMakeFiles/hal.dir/Src/hal.c.obj	f9a0a9727c2eda2b
+67	243	7908532961308293	BSP/CMakeFiles/bsp.dir/Src/bsp_init.c.obj	eae2726ff6a3757a
+58	250	7908532961211264	Modules/uart/CMakeFiles/uart.dir/src/uart.c.obj	4979c5baa76e360d
+85	255	7908532961486410	BSP/CMakeFiles/bsp.dir/Src/bsp_w25qxx.c.obj	77426e3fb0f553e5
+80	292	7908532961431553	BSP/CMakeFiles/bsp.dir/Src/bsp_board_manager.c.obj	fb8792ab3e6d3cb9
+73	297	7908532961370713	BSP/CMakeFiles/bsp.dir/Src/stm32f407vet6_board.c.obj	e09f143ebf2c7378
+159	301	7908532962227977	Modules/led/CMakeFiles/led.dir/src/led.c.obj	f81c04216db73f61
+61	343	7908532961246426	Modules/w25qxx/CMakeFiles/w25qxx.dir/Src/w25qxx.c.obj	1323ceff5f2de7f3
+38	370	7908532961014109	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_gpio.c.obj	b6850ab729e76492
+91	380	7908532961550065	BSP/CMakeFiles/bsp.dir/Src/bsp_key.c.obj	1a935290b16864c0
+243	395	7908532963069274	CMakeFiles/stm32f407vet6_cmake.dir/startup_stm32f407xx.s.obj	b5a75378db83dc21
+49	399	7908532961132664	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_spi.c.obj	f7e0911aaf0b3af
+164	404	7908532962281218	Middlewares/logging/CMakeFiles/logging.dir/src/logging.c.obj	50c1cd09ee8934e1
+46	408	7908532961095920	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_delay.c.obj	582888277cddaf7e
+221	413	7908532962844751	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/sysmem.c.obj	c095fbfdd0d59cee
+42	417	7908532961060292	HAL/CMakeFiles/hal.dir/Src/arch/stm32f4/hal_stm32f4_uart.c.obj	df787ab831e6e2b4
+228	442	7908532962910366	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/syscalls.c.obj	f55e0cca90c94027
+215	585	7908532962774905	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/stm32f4xx_hal_msp.c.obj	5411b055884697f
+195	590	7908532962577474	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/stm32f4xx_it.c.obj	d64fe2dfedc34157
+176	648	7908532962398578	CMakeFiles/stm32f407vet6_cmake.dir/Core/Src/main.c.obj	e02e91f67899b94
+250	654	7908532963143327	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Core/Src/system_stm32f4xx.c.obj	98718870e24fdc98
+255	660	7908532963193704	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c.obj	b4cbb79cfdb0499f
+292	694	7908532963558756	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c.obj	9e3e07f22c592e2e
+301	707	7908532963645921	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c.obj	77f344137ebef544
+297	711	7908532963601426	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c.obj	654897fed5ce4603
+404	718	7908532964669944	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c.obj	eef165e34f85222c
+370	730	7908532964336140	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c.obj	a8ff6a868245f407
+417	731	7908532964806727	HAL/libhal.a	1cac9cc1eea4712c
+343	764	7908532964064412	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c.obj	7e56c4dd817904f1
+399	765	7908532964630911	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c.obj	3a843a6f430facac
+380	765	7908532964441095	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c.obj	d4262c855c2e4a85
+413	777	7908532964763760	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c.obj	1d3d25d51d2ed50
+408	795	7908532964717836	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c.obj	bf712b1a5a395d40
+395	796	7908532964584987	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c.obj	f9570c42488c1a6e
+442	821	7908532965054374	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c.obj	b8e31886dd11f779
+731	827	7908532967947346	Modules/delay/libdelay.a	fa50f3f1c7df37b
+738	841	7908532968023499	Modules/uart/libuart.a	f980800b2f79773c
+747	847	7908532968100728	Modules/w25qxx/libw25qxx.a	6740ff1d64083f6c
+755	855	7908532968190455	Modules/led/libled.a	4975295d4e0f5144
+841	959	7908532969051621	Middlewares/logging/liblogging.a	df543b4167ac9a8e
+590	976	7908532966534270	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c.obj	733ca570ebe27f54
+847	980	7908532969098608	BSP/libbsp.a	e0765276282a1d70
+585	986	7908532966479014	cmake/stm32cubemx/CMakeFiles/STM32_Drivers.dir/__/__/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c.obj	ae9df026f66922f1
+986	1216	7908532970495241	stm32f407vet6_cmake.elf	4338dca859bbb8b4