/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : hal_eth.h
  * @brief          : Hardware Abstraction Layer Ethernet interface header file
  ******************************************************************************
  */
/* USER CODE END Header */

#ifndef HAL_ETH_H
#define HAL_ETH_H

#include "hal.h"

/**
 * @brief Ethernet instance definitions
 */
typedef enum {
    HAL_ETH_INSTANCE_1 = 0,    /*!< Ethernet instance 1 */
    HAL_ETH_INSTANCE_MAX
} hal_eth_instance_t;

/**
 * @brief Ethernet mode definitions
 */
typedef enum {
    HAL_ETH_MODE_HALFDUPLEX = 0,    /*!< Half duplex mode */
    HAL_ETH_MODE_FULLDUPLEX,        /*!< Full duplex mode */
    HAL_ETH_MODE_MAX
} hal_eth_mode_t;

/**
 * @brief Ethernet speed definitions
 */
typedef enum {
    HAL_ETH_SPEED_10MBPS = 0,    /*!< 10 Mbps speed */
    HAL_ETH_SPEED_100MBPS,       /*!< 100 Mbps speed */
    HAL_ETH_SPEED_MAX
} hal_eth_speed_t;

/**
 * @brief Ethernet PHY address definitions
 */
typedef uint8_t hal_eth_phy_addr_t;

/**
 * @brief Ethernet MAC address structure
 */
typedef struct {
    uint8_t byte[6];    /*!< MAC address bytes */
} hal_eth_mac_addr_t;

/**
 * @brief Ethernet configuration structure
 */
typedef struct {
    uint8_t enable;                     /*!< Ethernet enable flag */
    hal_eth_instance_t instance;        /*!< Ethernet instance */
    hal_eth_mode_t mode;                /*!< Ethernet mode */
    hal_eth_speed_t speed;              /*!< Ethernet speed */
    hal_eth_phy_addr_t phy_addr;        /*!< PHY address */
    hal_eth_mac_addr_t mac_addr;        /*!< MAC address */
    uint8_t auto_negotiation;           /*!< Auto negotiation enable flag */
    uint8_t interrupt_enable;           /*!< Interrupt enable flag */
} hal_eth_config_t;

/**
 * @brief Ethernet status structure
 */
typedef struct {
    uint8_t link_up;        /*!< Link up status */
    uint8_t duplex;         /*!< Duplex mode (0: half, 1: full) */
    uint32_t speed;         /*!< Speed in Mbps */
    uint32_t rx_packets;    /*!< Received packets count */
    uint32_t tx_packets;    /*!< Transmitted packets count */
    uint32_t rx_errors;     /*!< Receive errors count */
    uint32_t tx_errors;     /*!< Transmit errors count */
} hal_eth_status_t;

/**
 * @brief Initialize Ethernet module
 * @param config: Pointer to Ethernet configuration structure
 * @retval HAL status code
 */
hal_ret_t hal_eth_init(const hal_eth_config_t* config);

/**
 * @brief Deinitialize Ethernet module
 * @param instance: Ethernet instance
 * @retval HAL status code
 */
hal_ret_t hal_eth_deinit(hal_eth_instance_t instance);

/**
 * @brief Get Ethernet status
 * @param instance: Ethernet instance
 * @param status: Pointer to Ethernet status structure
 * @retval HAL status code
 */
hal_ret_t hal_eth_get_status(hal_eth_instance_t instance, hal_eth_status_t* status);

/**
 * @brief Set Ethernet MAC address
 * @param instance: Ethernet instance
 * @param mac_addr: Pointer to MAC address structure
 * @retval HAL status code
 */
hal_ret_t hal_eth_set_mac_addr(hal_eth_instance_t instance, const hal_eth_mac_addr_t* mac_addr);

/**
 * @brief Get Ethernet MAC address
 * @param instance: Ethernet instance
 * @param mac_addr: Pointer to MAC address structure
 * @retval HAL status code
 */
hal_ret_t hal_eth_get_mac_addr(hal_eth_instance_t instance, hal_eth_mac_addr_t* mac_addr);

/**
 * @brief Check Ethernet link status
 * @param instance: Ethernet instance
 * @param link_up: Pointer to store link up status
 * @retval HAL status code
 */
hal_ret_t hal_eth_check_link(hal_eth_instance_t instance, uint8_t* link_up);

/**
 * @brief Reset Ethernet PHY
 * @param instance: Ethernet instance
 * @param phy_addr: PHY address
 * @retval HAL status code
 */
hal_ret_t hal_eth_reset_phy(hal_eth_instance_t instance, hal_eth_phy_addr_t phy_addr);

/**
 * @brief Read PHY register
 * @param instance: Ethernet instance
 * @param phy_addr: PHY address
 * @param reg_addr: Register address
 * @param value: Pointer to store register value
 * @retval HAL status code
 */
hal_ret_t hal_eth_read_phy_reg(hal_eth_instance_t instance, hal_eth_phy_addr_t phy_addr, uint16_t reg_addr, uint16_t* value);

/**
 * @brief Write PHY register
 * @param instance: Ethernet instance
 * @param phy_addr: PHY address
 * @param reg_addr: Register address
 * @param value: Register value
 * @retval HAL status code
 */
hal_ret_t hal_eth_write_phy_reg(hal_eth_instance_t instance, hal_eth_phy_addr_t phy_addr, uint16_t reg_addr, uint16_t value);

/**
 * @brief Get default Ethernet configuration
 * @return Pointer to default Ethernet configuration
 */
const hal_eth_config_t* hal_eth_get_default_config(void);

#endif /* HAL_ETH_H */